RT1 - Anderson Powerpole Removal, Insertion/Extraction Tool
Tool is perfect for extracting inserted contacts from Powerpole housings. It also helps insert contacts for smaller gauge wires. "U" shape tool tip. Works with Anderson 15, 30 and 45 Amp Powerpoles
For removal, slide one end of the "U" shape tool between the flat contact tip and the housing spring. Twist or lift the contact up off the spring, and pull the contact by the wire back out the rear of the housing.
For insertion, rest the "U" shape tip around the wire putting pressure on the back barrel of the contact. This helps you put extra pressure directly on the contact for insertion.