(800) 737-2787 (RF Parts)
(770) 614-7443 (Diamond)
rfp@rfparts.com
435 S. Pacific St.
San Marcos, CA 92078

CW10CLR Silcone WeatherProofing Tape, Clear, 10 feet

CW10CLR Silcone WeatherProofing Tape,  Clear, 10 feet

Be the first to review this product

In Stock
$5.95
  • Buy 6 for $5.45 each and save 9%
  • Buy 12 for $4.50 each and save 25%
  • Buy 35 for $3.75 each and save 37%
  • Buy 70 for $3.45 each and save 43%
  • Buy 140 for $3.25 each and save 46%
OR

Quick Overview

Create a long lasting air and water tight seal with no sticky mess with CoaxWrap™ Silicone Tape
Color: Clear
Length: 10 ft  

Details

Self Fusing
Sticks/Bonds Only to Itself

No Adhesive
Leaves No Residue

Stretches up to 300%
Conforms to Irregular Shapes

Withstands Exposure

Won’t Melt to 500ºF (260ºC)

Stays Flexible to -60ºF (-50ºC)

Forms an Air & Water Tight Seal

Protects Against Corrosion

Insulates to 8000 Volts

Resistant to UV Breakdown

 

 

Technical Data

Operating Temperature
Continuous: -49 to +392°F (-45 to +200°C)
Intermittent: -85 to +500°F (-65 to +260°C)
Cold Brittle Point: -85°F (-45°C)

Hardness, (Test Method ASTM D2148)
Cured at Room Temperature, 24 hours: 50 +/-5 Shore ‘A’
Cured at 300°F (150°C), 24 hours: 70 +/-5 Shore ‘A’
Cured at 480°F (250°C), 24 hours: 75 +/-5 Shore ‘A’

 

Density (Test Method ASTM D792)
1.2 g/cc (0.043 lb/in)

Flammability, Maximum (Test Method ASTM F963)
0.10 inch/second

Tensile Strength, Minimum (Test Method ASTM D119)
700 psi

Tear Strength, Minimum (Test Method ASTM D264)
85 ppi

Adhesive Bond Strength, Minimum (Test Method MIL-I-46852)
2 lbs

Adhesion, Maximum Unwind (Test Method ASTM D2148)
3 inches

Elongation, Minimum (Test Method ASTM D119)
300%

Water Absorption, Maximum by Weight (Test Method MIL-I-46852)
3%

Volume Resistivity, Minimum (Test Method MIL-I-46852)
3 x 1014 ohm-cm

Dielectric Constant (Test Method ASTM D150)
2.95 kHz

Dielectric Strength, Minimum (Test method MIL-I-46852)
400 V/mil

Dissipation Factor (Test Method ASTM D150)
0.0004 kHz

Shelf Life
60+ months

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.