|
Epoxy Encapsulated High Voltage Rectifiers
|
 |
Part Number 38050 Encapsulated High Voltage Single String Rectifier with heavy duty components designed for the most demanding of services. This assembly uses 6 Ampere rated diodes. Each diode is bridged with a resistor to divide transients equally across each component. Conservatively rated at 3 Amperes and 20,000 Volts PIV. Each end is slotted for #6 screw mounting. |
 |
Part Number 18050 Encapsulated High Voltage Rectifier in a voltage doubler configuration. Uses 2.5 Ampere diodes encapsulated in thermally efficient epoxy which is then cemented into an aluminum channel for mounting. Rated 10,000 Volts PIV per section, or 20,000 Volts PIV for the whole assembly. This unit is rated 0.8 Ampere average. A slot is punched in each end of the channel for a #6 mounting screw. |
| Part Number |
PIV |
Maximum Current |
Surge Current |
Size Inches |
Style |
Price Ea. |
38050 |
20 KV |
3.0 A |
400 A |
7.5 x 1 x 1 |
Single |
$ 125.00 |
18050 |
26 KV |
0.8 A |
60 A |
4.8 x .63 x 1.5 |
Doubler |
95.00 |
21050 |
No longer available. Use substitute Part Number 3HC15. |
Call for current pricing.
|
|
High Voltage Rectifier Blocks
|
| Part Number |
Repetitive Peak Reverse Voltage
VRMM Per Leg
V(Volts)
|
Avg. Forward
Current Max
IFAVM@55° C
A(Amps)
|
Max Forward
Voltage Drop
VF@5F Per Leg
V(Volts)
|
Max Surge Current
IFSM (8.3ms)
A(Amps)
|
Price Each |
HC5 |
5000 |
1.0 |
4.5 |
50 |
$ 49.95 |
HC10 |
10000 |
1.0 |
9.0 |
50 |
54.95 |
3HC5 |
5000 |
2.5 |
4.8 |
150 |
64.95 |
3HC10 |
10000 |
2.0 |
9.0 |
150 |
69.95 |
3HC15 |
15000 |
1.5 |
13.2 |
150 |
79.95 |
|
|
Open Stack High Voltage Rectifiers
|
 |
Part Number 55050/55014 Convection Cooled, Open Construction High Voltage Rectifier. One of various configurations available. Used in many of the leading FM broadcast transmitters sold today. Conservatively rated at 5.5 Amperes, 40 KV (20 KV per section) PIV rating makes for a very high reliability component. Each rectifier element in the stack is bridged with a Heavy Duty MOV for the maximum in transient voltage protection. Requires minimum 100 CFM air flow. 100% interchangeable with rectifiers CK299, CKE047 and part #353-6596-030 in Continental's 5 KW through 30 KW transmitters (3 units required for the 3-phase full wave bridge). |
 |
Part Number 51048/51000 Convection Cooled, Open Construction High Voltage Rectifier. Individual board used in the 51050. It may be used in two's for lower power transmitters. Use as 24 KV PIV single string or as a doubler where 12 KV PIV per section is suitable. Conservatively rated at 5.5 Ampere. Direct replacement for CCA transmitters. |
| New Part Number |
Old Part Number |
Max. PIV |
Rated Current |
Surge Current |
Size Inches |
Style |
| 51000 |
51048 |
24 KV # |
5.5 A |
400 A |
9.1 x 1.9 x 1.5 |
Board only, Single String |
| 55014 |
55050 |
20 KV # |
5.5 A |
400 A |
10.8 x 3.8 x 3.8 |
Doubler |
Call for current pricing.
Key
# With MOV transient protection.
& Continental Electronics equivalent.
|
