Coaxial Cable & Accessories
Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss. Here is more information on Coaxial Cables.
Custom Cables and Custom Cable Assemblies
RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.
Coaxial Cables and Accessories
Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )
|
Waveguide (Elliptical Wavegude)
|
Heliax Specials |
||
RG - Belden Coax Cables |
CNT - Andrew Coax Cables |
||
Rotor Cable |
Coaxial Cable Tools |
|
|
|
|
|
|
|
LMR® is a registered trademark of Times Microwave Systems.
Here is a list of which cables go in which cable groups. PDF
-
RFA-4009 RF Industries Heavy Duty Crimp Handle and Die Kit
$469.91 -
RFA-4005-501 RF Industries Crimping Tool Kit with 6 Dies and Hard Case
$229.91 -
RFA-4005 RF Industries Crimping Tool Kit in Hard Case
$159.91 -
RFA-4005-314 RF Industries Crimp Handle/Die Combo Set for LMR400 Cable
$74.91Specific For LMR400/9913 coax cable. Combo of part number RFA-4005-20 and RFA-4005-14.
You can use other dies on the handle, but this combo is specific for the Popular LMR400/9913/CNT400 Coax Cables. It will crimp the Ferrule on RG213, RG8, RG214 Coax Cables, but not the center pin. (Ferrule Only).
MFR: RF Industries
SKU: RFA-4005-314 -
RFA4076-48 7 piece Cable Kit and Rack. 6pcs 48" Cable Assemblies and Mounting Rack.
Regular Price: $79.95
Special Price $69.95
-
RFA-4005-20 RF Industries Crimping Tool Handle
$49.91 As low as: $47.41The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.
MFR: RF Industries
SKU: RFA-4005-20See Die Sets
-
RFA-4087 RF Industries Stripping Tool for RFI / Amphenol Connectors
$49.91 As low as: $47.41Contains 3 adjustable blades.
- Die-cast zinc body
- Adjustable SK-5 blade (Replacement blade kit RFA4087-R14)
- Two or three-step stripping
- 9.25mm to 10.8mm (.364 to .425 inches)
- For RG-8, 11, 213, 214, 9913, 9914, LMR400, LMR400UF
- Perfect for larger coax stripping needs
MFR: RF Industries
SKU: RFA-4087 -
RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle
$32.91 As low as: $31.26The RFA-4005-01 Precision Die Set. Hex Cavity dimensions are: .052, .068, .100, .213, .255
Will work on the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, LMR195, LMR240, Proflex and various video cables.
MFR: RF Industries
SKU: RFA-4005-01NOTE: Will also work on PALADIN 1300 SERIES.
-
RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle
$32.91 As low as: $31.26The RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and Belden 9913 cables.
Hex Cavity Dimensions: .100, .128, .429 inch
Die set for Cable Group E, F, I cables: RG8, 213, 214, 9913, & LMR400 type cables.
NOTE: Will also work on PALADIN 1300 SERIES.
MFR: RF Industries
SKU:RFA-4005-02 -
RFA-4005-14 RF Industries Die set for RFA4005 Crimp Handle
$32.91 As low as: $31.26
Items 1 to 10 of 13 total
- 1
- 2
-
