Coaxial Cable & Accessories
Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss. Here is more information on Coaxial Cables.
Custom Cables and Custom Cable Assemblies
RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.
Coaxial Cables and Accessories
Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )
|
Waveguide (Elliptical Wavegude)
|
Heliax Specials |
||
RG - Belden Coax Cables |
CNT - Andrew Coax Cables |
||
Rotor Cable |
Coaxial Cable Tools |
|
|
|
|
|
|
|
LMR® is a registered trademark of Times Microwave Systems.
Here is a list of which cables go in which cable groups. PDF
-
-
EC4-NMNF-75 Pre-Made Assembly, 75 ft EC4-50 w/Type-N Male to Type-N Female Connectors
$239.91 -
L4-PNMNM-3 3 foot LDF4-50A & L4TNM-PSA Installed on both sides
$106.91 -
50 foot LDF4-50A Cable Assembly with L4TNM-PSA Connectors Installed on Both Ends
$218.73Out of stock
-
A5-NMNM-110 Cable assembly, 110ft AVA5-50 & 78EZNM on both sides.
$801.40 -
-
-
-
SCF12-DMDM-20 20 FTCellflex Cable SCF12-50 W/ 7/16 Din Male Connectors
Regular Price: $79.95
Special Price $59.95
SCF12-DMDM-20 20 FTCellflex Cable SCF12-50 W/ 7/16 Din Male Connectors, One installed and other loose (to install), MFR: RFS Cablewave (Factory #: 826186-920) MFR: RFS Cablewave
Cellflex Pre-Made cable assembly, SCF 12-50 J Cable with 7/16 DIN male connectors. Once connector is installed and other is loose to allow for cable run and then install connector. You can cut this cable to desired length and then install connector. We have limited quantity of these at special price.
Limited Quantity available.
-
