1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Accessories

252151-4, 42396A-11, 252146-2, 252151 Cable Entry Boot, 252150-2 Cable Entry Boot, CS104 Coaxial seal, 1/2"w x 3/32" th., 60" long, 40417 - Cable Ties. Bag of 50, CS101 - Coax-Seal Bulk Pack 500 strips, CS101-2 Coax Seal, Bulk Packed, 2000pcs, 42396A-2 Hanger Kit for 1-5/8" LDF7-50 Heliax Cable, Talley, 252146 Cable Entry boot, CS106 - Coaxial Seal. 1" Wide. 4 Rolls of 12', CS105 Coaxial seal, 1/2w x 3/32"th, 4 rolls of 12'

List  Grid 

per page
Set Ascending Direction
  1. 1316MCLICK Andrew/CommScope Miniature Click-on Hanger for 13–16 mm cable 10/Pkg (Clamps Only)

    1316MCLICK Andrew/CommScope Miniature Click-on Hanger for 13–16 mm cable 10/Pkg (Clamps Only)

    $31.91

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    NOTE: Hardware Sold Separately
    MFR: Andrew/CommScope
    SKU: 1316MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire

  2. SHK-12-2-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    SHK-12-2-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    Double stack
    Includes hardware and angle adapter
    MFR: Andrew / Commscope
    NOTE: SPECIAL ORDER.  LEAD TIME IS 8 WEEKS ARO

     

  3. SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    $58.91

    SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    MFR: Andrew / Commscope
    SKU: SSHAK-3812

     

  4. 31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Andrew

    31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Andrew

    31769-1 3/8" x 1" Hardware Kit w/Lockwasher & Nut, 10/Pkg, Kit for Standard Hangers, includes 3/8 in fillister head bolts and hardware (Nuts &; Lock Washers), 10 pcs/pak

  5. WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  Wireless Solutions

    WSDCB12 Mini Cable Block for 1/2" Cable. Supports 2 cable runs. Wireless Solutions

    Regular Price: $19.95

    Special Price $15.95

    WSDCB12  Mini Cable Block for 1/2" Cable. Supports 2 cable runs.  MFR: Wireless Solutions.

     

  6. 42396A-2 Andrew Hanger Kit for 1-5/8"  LDF7-50 Heliax Cable

    42396A-2 Andrew Hanger Kit for 1-5/8" LDF7-50 Heliax Cable

    42396A-2  Butterfly Hanger for 1-5/8 in coaxial cable(10pcs per pack), MFR: Andrew / Commscope

     

  7. SHK-12-1-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    SHK-12-1-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    Single stack
    Includes hardware and angle adapter
    MFR: Andrew / Commscope
    SKU: SHK-12-1-P

     

  8. 68MCLICK CommScope Double Click-on Hanger for 6-8mm Cable 10/Pkg (Clamps only)

    68MCLICK CommScope Double Click-on Hanger for 6-8mm Cable 10/Pkg (Clamps only)

    $27.91

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    MFR: Andrew/CommScope
    SKU: 68MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    912MCLICK  Hanger Clamp for 9-12mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  9. 912MCLICK Andrew/CommScope Miniature Click-on Hanger for 9–12 mm Cable 10/Pkg (Clamp Only)

    912MCLICK Andrew/CommScope Miniature Click-on Hanger for 9–12 mm Cable 10/Pkg (Clamp Only)

    $27.91

    Hanger clamp for 2 cables.  Use with 252026-10KT-P Angle clamp and 5/16" Rod & Hardware kit.  See options below.
    MFR: Andrew/CommScope
    SKU: 912MCLICK
    NOTE:  Use the following hardware:
    252026-10KT-P  Angle Adapter, miniature, (5/16") tapped hole, 10pk (Clamp Only)
    252027-10KT-P  5/16" Rod & hardware for stacking one hanger kit  (Rod is 2-1/2")
    252028-10KT-P  5/16" Rod & hardware for stacking two hanger kits  (Rod is 6")
    252029-10KT-P  5/16" Rod & hardware for stacking three hanger kits  (Rod is 10-5/16")
    68MCLICK  Hanger Clamp for 6-8mm Cable or wire
    1316MCLICK  Hanger Clamp for 13-16mm Cable or wire

  10. SH-U78  Snap-In Hanger Kit for 7/8" Cable, Eupen

    SH-U78 Snap-In Hanger Kit for 7/8" Cable, Eupen

    Out of stock

    SH-U78  Snap-In Hanger Kit for 7/8" Cable. Can use with Smooth or Corrugated Cable.  MFR: Eupen

Items 1 to 10 of 76 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5