Details
F4PNMV2-C Type N Male for 1/2 in FSJ4-50B cable, Knurled Nut, Captivated Pin
MFR: Andrew
Limited Quantity Available, Obsolete, Replaced by F4PNMV2-HC
|
General Specifications |
Interface |
N Male |
Body Style |
Straight |
Brand |
HELIAX® |
Mounting Angle |
Straight |
|
Electrical Specifications |
Connector Impedance |
50 ohm |
Operating Frequency Band |
0 – 10200 MHz |
Cable Impedance |
50 ohm |
3rd Order IMD, typical |
-120 dBm @ 910 MHz |
3rd Order IMD Test Method |
Two +43 dBm carriers |
RF Operating Voltage, maximum (vrms) |
707.00 V |
dc Test Voltage |
2000 V |
Outer Contact Resistance, maximum |
0.30 mOhm |
Inner Contact Resistance, maximum |
2.00 mOhm |
Insulation Resistance, minimum |
5000 MOhm |
Average Power |
0.6 kW @ 900 MHz |
Peak Power, maximum |
10.00 kW |
Insertion Loss, typical  |
0.05 dB |
Shielding Effectiveness |
-110 dB |
|
Mechanical Specifications |
Outer Contact Attachment Method |
Crush-flare |
Inner Contact Attachment Method |
Captivated |
Outer Contact Plating |
Trimetal |
Inner Contact Plating |
Gold |
Attachment Durability |
25 cycles |
Interface Durability |
500 cycles |
Interface Durability Method |
IEC 61169-16:9.5 |
Connector Retention Tensile Force |
890 N | 200 lbf |
Connector Retention Torque |
4.07 N-m | 36.00 in lb |
Insertion Force |
66.72 N | 15.00 lbf |
Insertion Force Method |
MIL-C-39012C-3.12, 4.6.9 |
Pressurizable |
No |
Coupling Nut Proof Torque |
1.69 N-m | 15.00 in lb |
Coupling Nut Retention Force |
444.82 N | 100.00 lbf |
Coupling Nut Retention Force Method |
MIL-C-39012C-3.25, 4.6.22 |
|
Dimensions |
Nominal Size |
1/2 in |
Diameter |
23.80 mm | 0.94 in |
Length |
54.00 mm | 2.13 in |
Weight |
90.00 g | 0.20 lb |
|
Environmental Specifications |
Operating Temperature |
-55 °C to +150 °C (-67 °F to +302 °F) |
Storage Temperature |
-70 °C to +150 °C (-94 °F to +302 °F) |
Immersion Depth  |
1 m |
Immersion Test Mating |
Mated |
Immersion Test Method |
IEC 60529:2001, IP68 |
Water Jetting Test Mating |
Mated |
Water Jetting Test Method |
IEC 60529:2001, IP66 |
Moisture Resistance Test Method |
MIL-STD-202F, Method 106F |
Mechanical Shock Test Method |
MIL-STD-202F, Method 213B, Test Condition C |
Thermal Shock Test Method |
MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C |
Vibration Test Method |
MIL-STD-202F, Method 204D, Test Condition B |
Corrosion Test Method |
MIL-STD-1344A, Method 1001.1, Test Condition A |
|
Standard Conditions |
Attenuation, Ambient Temperature |
20 °C | 68 °F |
Average Power, Ambient Temperature |
40 °C | 104 °F |
Return Loss/VSWR
Frequency Band |
VSWR |
Return Loss (dB) |
0–1000 MHz |
1.07 |
30.00 |
1000–3000 MHz |
1.11 |
26.00 |
3000–4000 MHz |
1.29 |
18.00 |
4000–5000 MHz |
1.67 |
12.00 |
5000–10200 MHz |
1.92 |
10.00
|