Radio & Amplifier Service Parts

HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz

We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years.  They were removed from service at "Applied Materials".   The Henrys as a whole and the parts therein, are in good condition.  Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.

• Eimac 3CX3000A7 tube. 
• Full Bird Dual Slug Wattmeter setup with forward and reflected power. 
• Three Phase 208/240 V input.
• Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.

• Power requirement: 40 Amps

Please send an email to customerservice@rfparts for any questions that you may have.

Weight 600 lbs.  (Local Pickup or Truck Freight)

FOB San Marcos, CA 

MFR: Henry Radio Electronics, California

Not available for export   Limited Warranty

• Rebuit with an Eimac core
• Filament: Thoriated Tungsten
• Voltage: 7.5 Volts
• Current @ 7.5 Volts: 51.5 Amps

Rebuilt * No longer available for export
MFR: RF Parts Company
SKU: 3CX3000A7-RFPR

Data Sheet

This rebuilt tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.

3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator

RF Deck removed from Henry Electronics RF Power Generator 3000D.  The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.

The deck consists of the following items:

• Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
• Tube socket and chimney for 3CX3000A7 tube (Tube not included)  See 3CX3000A7
• Plate choke assembly
• Line Section w/ elements
• See HENRY "2000 WATT SECTION" diagram below:

 MFR: Henry Electronics, USA

Limtied Quantity Available Not for Export

ECA26028 High Voltage Transformer, 208/230vac 3 Phase, Primary, 6000vac 3amp Secondary, Removed from Henry Electronics 3000D

This transformer was removed from a working Henry 3000D RF Power Generator.  In excellent condtion - Like New.
Size: 12" Long x 8" High x 10" wide, Weight: 120 lbs  (Must ship by Truck Freight)
Made in USA, Limited Quantity Available, Not Available for Export

The Power Plus HL-36U 70 Centimeter All Mode Linear Amplifier is the perfect combination of performance and value.  Employment of strip-line technology coupled with modular construction provides the HL-36U with unsurpassed reliability and RF Performance. 

• Switchable GaAsFET receive preamplifier
• Low Noise filter
• Switchable Dual Mode operation (FM / SSB)
• Input power protection circuitry (Overdrive protection)
• RX and TX indicator LED's
• Mounting Bracket / Hardware

New Old Stock * No longer available for export
MFR: RF Limited
SKU: HL-36U
(90 day limited over the counter warranty through RF Parts)
NOTE: These amplifiers were found in storage.  Factory no longer produces this item and does not support warranty offered in manual. 

• Uses two MRF422 150 Watt Transistors

Clean Pull * No longer available for export
MFR: Henry Electronics
SKU: 9600-0200-P

Original replacement cover for Pride DX300/KW 1 amplifiers. Black Crinkle finish. Vented all around. Factory 4 Pack of original covers.

New Old Stock * No longer available for export.
MFR Part #: 85-0300-11
MFR: Pride Electronics, USA
SKU: 85-0300-11-4

ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.  
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102

ECA5024 Swinging Choke Transformer, 15-8 Henry, 1.5A Continuous (Removed from Henry 3000D), MFR: ECA

This High Voltage Choke Transformer was removed from a working Henry 3000D RF Power Generator Amplifier. 

It is in like-new, excellent condtion

Size: 5.5" Long x 6-1/2" High x 8" wide, Weight: 46 lbs

Limited Quantity Available  No longer available for Export