Radio & Amplifier Service Parts

3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator

RF Deck removed from Henry Electronics RF Power Generator 3000D.  The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.

The deck consists of the following items:

• Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
• Tube socket and chimney for 3CX3000A7 tube (Tube not included)  See 3CX3000A7
• Plate choke assembly
• Line Section w/ elements
• See HENRY "2000 WATT SECTION" diagram below:

 MFR: Henry Electronics, USA

Limtied Quantity Available Not for Export

Instruction Manuals for Henry Electronics Power Generators (Reprint)

Includes 2 manuals that are for the following Henry Electronics models:  500D, 1000D, 1500D, 2000D, 2500D, 3000D, and 5000D

Include:

• Specifications
• operation
• schematics
• diagrams
• Parts list

SKU: SM1000D

POWERCORD-8/4-220  31 FOOT 8/4 Wire with Hubbell 231A connector, (Removed from Henry 3000D) No longer available for Export

31-1/2 feet of Royal Electric 8/4 Wire SO 90°C (4 conductor - 8 gauge) with Hubbell 4 pin connector (220v) 30amp 250v 30 installed and Thomas and Betts Chassis connector.  Removed from Henry 3000D RF Power Generator Amplifier.  Like new condition. 

Blower Fan removed from Henry Electronics 3000D RF Power Generator Amplifier.
Applications: Heating, Ventilating, Exhausting, Cooling Components

• RPM 2200
• Volts 115
• Amps 1.54/1.45
•  60/50 Hz

Used (Like New) * Not longer available for export
MFR: Dayton
SKU: 4C006B

This capacitor was removed from Original Henry 3000D amplifier and is in NOS condition.  Henry part number C703. Completely checked and meets all factory specs. No PCB.

Size: 4 5/8" long x 3 3/4" wide x 7 1/2" high
Used * No longer available for export
MFR: Aerovox
SKU: PO7D5004Y21

ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim

This transformer was removed from a working Henry 3000D RF Power Generator amplifier.  In excellent condtion - Like New.

Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs

Made in USA, Limited Quantity Available, Not Available for Export

ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.  
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102

HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz

We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years.  They were removed from service at "Applied Materials".   The Henrys as a whole and the parts therein, are in good condition.  Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.

• Eimac 3CX3000A7 tube. 
• Full Bird Dual Slug Wattmeter setup with forward and reflected power. 
• Three Phase 208/240 V input.
• Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.

• Power requirement: 40 Amps

Please send an email to customerservice@rfparts for any questions that you may have.

Weight 600 lbs.  (Local Pickup or Truck Freight)

FOB San Marcos, CA 

MFR: Henry Radio Electronics, California

Not available for export   Limited Warranty