Stripping Tools - Manual
-
TK600EZ Times Microwave Tool Kit with Tool Pouch HX-4, Y1720, CCT-02, CST-600
$425.91 -
TK400EZ Times Microwave Tool Kit for LMR400 Crimp Connectors
$414.91 -
TK-01 Times Microwave Installation Tool Kit for both LMR-400 & 600 Connectors
$1,149.95Out of stock
Installation Tool Kit for both LMR-400 & 600 connectors
Kit includes the following:
CT-U Crimp Handle with 2 dies (0.429 - Y1719 & 0.610 - Y1720), CCT-02 Cutting Tool, CST-400 Stripping Tool for LMR400 Connectors, CST-600 Stripping Tool for LMR600 Connectors, and tool pouch.
Special Order, Delivery is 3-4 weeks
MFR: Times Microwave
SKU: TK-01 -
SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I
$72.91RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.
Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50Cable Types: LMR400, CNT400
MFR: RF Industries
SKU: SDT400-50 -
RFA-4400-01 RF Industries Stripping Tool for LMR400 Type Cable
$53.91 As low as: $51.21This stripping tool works exclusive to RF Industries and Amphenol connectors only.
NOTE: Will not work on Times Microwave connectors. See CST400 if using Times Microwave connectors.Features:
• Ergonomic design
• Cut jacket, braid & dielectric in one step
• Tool steel twin blades in easily replaced cartridges
• Cartridges configured forspecific LMR-400 cable connectors
• No guesswork
• Cartridges interchangeable within seriesMFR: RF Industries
SKU: RFA-4400-01 -
RFA-4087 RF Industries Stripping Tool for RFI / Amphenol Connectors
$49.91 As low as: $47.41Contains 3 adjustable blades.
- Die-cast zinc body
- Adjustable SK-5 blade (Replacement blade kit RFA4087-R14)
- Two or three-step stripping
- 9.25mm to 10.8mm (.364 to .425 inches)
- For RG-8, 11, 213, 214, 9913, 9914, LMR400, LMR400UF
- Perfect for larger coax stripping needs
MFR: RF Industries
SKU: RFA-4087 -
RFA-4086-003 RF Industries Stripping Tool (3 Blades) for Cable Group C, C1, C2, D, Q, X
$32.91 As low as: $29.70Universal Stripping tool for most popular cable sizes. Uses 3 blades to cut most cables for RF Industries and Amphenol style connectors in the following cable
Groups: C, C1, C2, D, Q, and X. See below for cable types. For Left or Right hand use. Replacement blades are available: RFA4086-R03
- Cable Group: C, C1, C2, D, Q, X
- Cable Type: RG6, 58, 59, 62, 142, LMR195, 200, & 240
MFR: RF Industries
SKU: RFA-4086-003NOTE: This tool is designed to produce the primary cuts. You will need to refer to the strip length dimensions on our drawing and manually adjust the final cuts accordingly.
-
MCPT-L4 Andrew Manual Cable Prep Tool for LDF4-50A Heliax Cable
$38.91