Tubes - Transmitting, Audio, Misc.
Please choose from the following TUBES Sub-Catagory choices:
572B |
811A |
6146 |
|
4CX350 Series | |||
SOCKETS |
CHIMNEYS |
PLATE CAPS |
|
BOOKS |
BASES |
PARASITIC SUPPRESSOR |
-
4CX10000D New (Rebuilt) Eimac Radial Beam Power Tetrode
$8,195.91The 4CX10000D is useful as an oscillator, amplifier, or modulator at frequencies up to 110 megahertz and is particularly suited for use as a linear RF amplifier or class-AB audio amplifier.
Rebuilt * No longer available for export
MFR: RF Parts Company
SKU: 4CX10000D-RFPRThis tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
-
4CX10000D Eimac Radial Beam Power Tetrode (Pull)
$5,695.91 -
SK-1510A Eimac Tube Socket (NOS)
$4,985.91These sockets are designed to be used with Eimac tube types 8349/4CX35,000C, 8351/4CV100,000C, and 4CW100,000D.
All metal parts are silver plated. The insulating material is high-temperature ceramic.
Cooling of the tube in use is done by directing air across the socket.New Old Stock * No longer available for export
MFR: Eimac
SKU: SK-1510ASee Data Sheet
Made in the USA -
SK-1510 Eimac Tube Socket Reconditioned
$4,487.91 -
SK-1510A Eimac Tube Socket Reconditioned
$4,487.91 -
4CX15000A / 8281 Eimac RF Parts Rebuilt Radial Beam Power Tetrode
$4,104.91- Filament: Thoriated Tungsten
- Voltage: 6.3 ± 0.3 Volts
- Current @ 6.3 volts: 160 Amps
Rebuilt * No longer available for export
MFR: Eimac
SKU: 4CX15000A-RFPRThis Rebuilt tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
HENRY 3000D Radio Frequency Power Generators from Henry Electronics
$3,990.95HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition. Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA -
SK-1510 Eimac Tube Socket (Pull)
$3,739.91 -
HICKOK 539C Calibrated Tube Tester (Pull)
$2,049.95Out of stock
-
3CX3000A7 RF Parts High-Mu Power Triode (Rebuilt)
$2,001.91- Rebuit with an Eimac core
- Filament: Thoriated Tungsten
- Voltage: 7.5 Volts
- Current @ 7.5 Volts: 51.5 Amps
Rebuilt * No longer available for export
MFR: RF Parts Company
SKU: 3CX3000A7-RFPRThis rebuilt tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA