Electron Tubes
-
HENRY 3000D Radio Frequency Power Generators from Henry Electronics
$3,990.95HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition. Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA -
HICKOK 539C Calibrated Tube Tester (Pull)
$2,049.95Out of stock
-
3CX15000A3 Svetlana Medium-Mu Power Triode (NOS)
$1,995.91Filament: Thoriated-tungsten mesh
Voltage: 6.3 ±0.3 V
Current @ 7.50V: 160 ANew Old Stock * No longer available for export
MFR: Svetlana
Made in Russia
SKU: 3CX15000A3-SVETThis New Old Stock (NOS) tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
-
4CX1000A / 8168 Eimac Ceramic Power Tetrode (NOS)
$1,595.91- Cathode: Oxide Coated, Unipotenial
- Heater Voltage: 6.0 ±0.3 Volts
- Heater Current at 6 Volts: 9.0 Amps
New Old Stock * No longer available for export
MFR: Eimac
SKU: 4CX1000A-EIThis New Old Stock (NOS) tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
8295A Eimac Radial Beam Power Pentode (NOS)
$1,295.91- Cathode: Oxide Coated Unipotential
- Voltage: 6.0 + 0.3 volts
- Current at 6.0 volts: 8.2 Amps
- Amplification Factor (Average): 3.4
New old Stock * No longer available for export
MFR: Eimac
SKU: 8295AThis New Old Stock (NOS) tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
4CX1000A / 8168 Eimac Ceramic Power Tetrode (Pull)
$995.91The 4CX1000A/8168 is a ceramic and metal, forced-air cooled, radial-beam tetrode, with a rated maximum plate dissipation of 1000 watts.
- Cathode: Oxide Coated, Unipotenial
- Heater Voltage: 6.0 ±0.3 Volts
- Heater Current at 6 Volts: 9.0 Amps
Clean Used * No longer available for export
MFR: Eimac
SKU: 4CX1000A-EI-PThis tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Thirty Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
8576/264 Eimac Transmitting Tube Pentode (NOS)
$799.95 -
4-400A EIMAC Transmit Tube (NOS/NIB)
$649.91 -
4-400A EIMAC / JAN-CIM Transmit Tube (NOS/NIB)
$649.91