243095-9 Commscope Stainless Steel Hardware Kit for 1/2" or 7/8" Double Click-on Hangers 10/Pkg (Hardware Only)
Includes 3/8" bolts and 3-3/4" Rod, works for single hanger clamp Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware Use either 294561 2" Standoff Adapter or 243684 Angle Clamp and LCLICK series hanger clamps. See below for matching hardware and hanger clamps. MFR: Commscope / Andrew SKU: 243095-9 NOTE: Use the following hardware
294561 2" Stand-off Adapter Stainless Steel with 3/8" Hole, Accepts Round Member Adapters 243684 Angle Clamp Adapter, compact with 3/8 inch tapped hole 243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5") 243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7") L4CLICK Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs) L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)
Product Classification
Product Type
Hardware kit
Ordering Note
CommScope® standard product in the United States and Canada
General Specifications
Thread Size
3/8 in
Dimensions
Maximum Stack Height
1
Length
95.25 mm | 3.75 in
Nominal Size
1/2 in | 7/8 in
Material Specifications
Material Type
Stainless steel
Packaging and Weights
Height, packed
149.86 mm | 5.9 in
Width, packed
63.5 mm | 2.5 in
Length, packed
63.5 mm | 2.5 in
Included
Forty flat washers | Forty lock washers | Ten 3/8 in threaded rods | Twenty hex nuts
Packaging quantity
10
Weight, gross
1.052 kg | 2.32 lb
You may also be interested in the following product(s)
