32APL144DE Variable Capacitor, 12-144 pf
Description: APL (1.406 wide by 1.36 inches high, two ceramics, one in front, one in rear). 11.4pF min to 144.3pF max. 0.032 inch air gap rated for 1070Vrms. 3/8-32 x 3/8 threaded bearing for single-hole mount; 0.50 inch long plain brass shaft; spider (rotor contact) in number 6 position (at rear ceramic). Stator lug in H position (rear ceramic, to right as seen from front). 2.40 inches long (from front of mounting flange to end of solder button in rear).
MFR: Part Number: APL-144-1K1-1B0N13B3N1
Min/Max Cap Pf.: 12-144
Total Plates: 34
Plate Spacing: .032"
Peak Volts: 1070V
W x L x H: 1.4" x 2.3" x 1.36"
NOTE: Good replacement for HF140 or MCA140. This will work in place of most 140pf capacitors where space is not issue.
|Made in the USA||N/A|