1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

CW10B Silicone WeatherProofing Tape, Black, 10 feet

Roll over image to zoom
  • Buy 6 for $4.95 each and save 17%
  • Buy 12 for $3.95 each and save 34%
  • Buy 35 for $3.50 each and save 42%
  • Buy 70 for $3.25 each and save 46%

Regular Price: $6.95

Special Price $5.95

In Stock

CW10B Silicone WeatherProofing Tape, Black, 10 feet, COAXWRAP

Create a long lasting air and water tight seal with no sticky mess with CoaxWrap™ Silicone Tape
Color: Black
Length: 10 ft  

Made in the USA


CW10B Silicone WeatherProofing Tape, Black, 10 feet

Triangular, 0.020 Thick at Center, 1" wide x 10 feet long. Black 

NOTE: Display Case is 35 pieces.

Self Fusing
Sticks/Bonds Only to Itself

No Adhesive
Leaves No Residue

Stretches up to 300%
Conforms to Irregular Shapes

Withstands Exposure

Won’t Melt to 500ºF (260ºC)

Stays Flexible to -60ºF (-50ºC)

Forms an Air & Water Tight Seal

Protects Against Corrosion

Insulates to 8000 Volts

Resistant to UV Breakdown

Technical Data

Operating Temperature
Continuous: -49 to +392°F (-45 to +200°C)
Intermittent: -85 to +500°F (-65 to +260°C)
Cold Brittle Point: -85°F (-45°C)

Hardness, (Test Method ASTM D2148)
Cured at Room Temperature, 24 hours: 50 +/-5 Shore ‘A’
Cured at 300°F (150°C), 24 hours: 70 +/-5 Shore ‘A’
Cured at 480°F (250°C), 24 hours: 75 +/-5 Shore ‘A’

Density (Test Method ASTM D792)
1.2 g/cc (0.043 lb/in)

Flammability, Maximum (Test Method ASTM F963)
0.10 inch/second

Tensile Strength, Minimum (Test Method ASTM D119)
700 psi

Tear Strength, Minimum (Test Method ASTM D264)
85 ppi

Adhesive Bond Strength, Minimum (Test Method MIL-I-46852)
2 lbs

Adhesion, Maximum Unwind (Test Method ASTM D2148)
3 inches

Elongation, Minimum (Test Method ASTM D119)

Water Absorption, Maximum by Weight (Test Method MIL-I-46852)

Volume Resistivity, Minimum (Test Method MIL-I-46852)
3 x 1014 ohm-cm

Dielectric Constant (Test Method ASTM D150)
2.95 kHz

Dielectric Strength, Minimum (Test method MIL-I-46852)
400 V/mil

Dissipation Factor (Test Method ASTM D150)
0.0004 kHz

Shelf Life
60+ months

Made in the USA

You may also be interested in the following product(s)

Additional Information

Featured Product No
Made in the USA Yes
Manufacturer No
Manufacturer Name MOCAP, INC.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.