L6TDF-PS Andrew 7-16 DIN Female Positive Stop™ for 1-1/4" LDF6-50 Cable

L6TDF-PS Andrew 7-16 DIN Female Positive Stop™ for 1-1/4"  LDF6-50 Cable

New Old Stock * No longer available for export
MFR: Andrew

General Specifications

• Interface 7-16 DIN Female
• Body Style Straight
• Brand HELIAX® | Positive Stop™
• Mounting Angle Straight

Electrical Specifications

• Connector Impedance 50 ohm
• Operating Frequency Band 0 – 3300 MHz
• Cable Impedance 50 ohm
• 3rd Order IMD, typical -120 dBm @ 910 MHz
• 3rd Order IMD Test Method Two +43 dBm carriers
• RF Operating Voltage, maximum (vrms) 1415.00 V
• dc Test Voltage 4000 V
• Outer Contact Resistance, maximum 1.50 mOhm
• Inner Contact Resistance, maximum 0.80 mOhm
• Insulation Resistance, minimum 5000 MOhm
• Average Power 3.0 kW @ 900 MHz
• Peak Power, maximum 40.00 kW
• Insertion Loss, typical 0.05 dB
• Shielding Effectiveness -130 dB

Mechanical Specifications

• Outer Contact Attachment Method Ring-flare
• Inner Contact Attachment Method Captivated
• Outer Contact Plating Trimetal
• Inner Contact Plating Silver
• Attachment Durability 25 cycles
• Interface Durability 50 cycles
• Interface Durability Method IEC 61169-16:9.5
• Connector Retention Tensile Force 1779 N | 400 lbf
• Connector Retention Torque 10.85 N-m | 96.00 in lb
• Insertion Force 200.17 N | 45.00 lbf
• Insertion Force Method IEC 61169-1:15.2.4
• Pressurizable No

Dimensions

• Nominal Size 1-1/4 in
• Diameter 51.21 mm | 2.02 in
• Length 89.00 mm | 3.50 in
• Weight 650.00 g | 1.43 lb

Environmental Specifications

• Operating Temperature -55 °C to +85 °C (-67 °F to +185 °F)
• Storage Temperature -55 °C to +85 °C (-67 °F to +185 °F)
• Immersion Depth 1 m
• Immersion Test Mating Unmated
• Immersion Test Method IEC 60529:2001, IP68
• Water Jetting Test Mating Unmated
• Water Jetting Test Method IEC 60529:2001, IP66
• Moisture Resistance Test Method MIL-STD-202F, Method 106F
• Mechanical Shock Test Method MIL-STD-202F, Method 213B, Test Condition C
• Thermal Shock Test Method MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
• Vibration Test Method MIL-STD-202F, Method 204D, Test Condition B
• Corrosion Test Method MIL-STD-1344A, Method 1001.1, Test Condition A

Standard Conditions

• Attenuation, Ambient Temperature 20 °C | 68 °F
• Average Power, Ambient Temperature 40 °C | 104 °F