1-800-RFPARTS (1-800-737-2787) 1-760—744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

L4.5PNM-RC Type-N Male Connector, LDF4.5-50, Andrew

  • Buy 10 for $58.95 each and save 2%
  • Buy 25 for $56.95 each and save 6%
$59.95
In Stock
OR

L4.5PNM-RC Type N Male RingFlare™ for 5/8" Heliax Cable LDF4.5-50, MFR: Andrew / Commscope


 


Be the first to review this product


Details

L4.5PNM-RC Type N Male RingFlare™ for 5/8" Heliax Cable LDF4.5-50

MFR: Andrew / Commscope

 

General Specifications  
Interface   N Male
Body Style   Straight
Brand   HELIAX®
Mounting Angle   Straight
   
Electrical Specifications  
Connector Impedance   50 ohm
Operating Frequency Band   0 – 6100 MHz
Cable Impedance   50 ohm
RF Operating Voltage, maximum (vrms)   707.00 V
dc Test Voltage   2000 V
Outer Contact Resistance, maximum   0.30 mOhm
Inner Contact Resistance, maximum   2.00 mOhm
Insulation Resistance, minimum   5000 MOhm
Average Power   0.6 kW @ 900 MHz
Peak Power, maximum   40.00 kW
Insertion Loss, typical 0.05 dB
Shielding Effectiveness   -110 dB
   
Mechanical Specifications  
Outer Contact Attachment Method   Self-flare
Inner Contact Attachment Method   Captivated
Outer Contact Plating   Trimetal
Inner Contact Plating   Gold
Attachment Durability   25 cycles
Interface Durability   500 cycles
Interface Durability Method   IEC 61169-16:9.5
Connector Retention Tensile Force   890 N   |   200 lbf
Connector Retention Torque   5.42 N-m   |   48.00 in lb
Insertion Force   66.72 N   |   15.00 lbf
Insertion Force Method   MIL-C-39012C-3.12, 4.6.9
Pressurizable   No
Coupling Nut Proof Torque   4.52 N-m   |   40.00 in lb
Coupling Nut Retention Force   444.82 N   |   100.00 lbf
Coupling Nut Retention Force Method   MIL-C-39012C-3.25, 4.6.22
   
Dimensions  
Nominal Size   5/8 in
Diameter   35.56 mm   |   1.40 in
Length   81.28 mm   |   3.20 in
Weight   181.44 g   |   0.40 lb

 

Additional Information

Featured Product No
Made in the USA No
Manufacturer Andrew / Commscope

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.