Details
L1TDM-PL 7-16 DIN Male Positive Lock for 1/4 in LDF1-50 cable
MFR: Andrew / Commscope
| General Specifications |
| Interface |
7-16 DIN Male |
| Body Style |
Straight |
| Brand |
HELIAX® |
| Mounting Angle |
Straight |
| |
| Electrical Specifications |
| Connector Impedance |
50 ohm |
| Operating Frequency Band |
0 – 8000 MHz |
| Cable Impedance |
50 ohm |
| 3rd Order IMD, typical |
-107 dBm @ 910 MHz |
| 3rd Order IMD Test Method |
Two +43 dBm carriers |
| RF Operating Voltage, maximum (vrms) |
778.00 V |
| dc Test Voltage |
2200 V |
| Outer Contact Resistance, maximum |
1.50 mOhm |
| Inner Contact Resistance, maximum |
0.40 mOhm |
| Insulation Resistance, minimum |
10000 MOhm |
| Average Power |
0.6 kW @ 900 MHz |
| Peak Power, maximum |
12.10 kW |
Insertion Loss, typical  |
0.05 dB |
| Shielding Effectiveness |
-110 dB |
| |
| Outline Drawing |
| |
 Click on image below to enlarge.
 |
| |
| |
|
| |
| Mechanical Specifications |
| Outer Contact Attachment Method |
Self-flare |
| Inner Contact Attachment Method |
Captivated |
| Outer Contact Plating |
Trimetal |
| Inner Contact Plating |
Silver |
| Attachment Durability |
25 cycles |
| Interface Durability |
500 cycles |
| Interface Durability Method |
IEC 61169-4:17 |
| Connector Retention Tensile Force |
450 N | 101 lbf |
| Connector Retention Torque |
1.40 N-m | 1.03 ft lb |
| Insertion Force |
200.00 N | 44.96 lbf |
| Insertion Force Method |
IEC 61169-1:15.2.4 |
| Pressurizable |
No |
| Coupling Nut Proof Torque |
50.00 N-m | 36.88 ft lb |
| Coupling Nut Retention Force |
1000.00 N | 224.81 lbf |
| Coupling Nut Retention Force Method |
MIL-C-39012C-3.25, 4.6.22 |
| |
| Dimensions |
| Nominal Size |
1/4 in |
| Diameter |
34.60 mm | 1.36 in |
| Height |
34.60 mm | 1.36 in |
| Length |
46.05 mm | 1.81 in |
| Weight |
109.66 g | 0.24 lb |
| Width |
34.60 mm | 1.36 in |
| |
| Environmental Specifications |
| Operating Temperature |
-55 °C to +85 °C (-67 °F to +185 °F) |
| Storage Temperature |
-65 °C to +125 °C (-85 °F to +257 °F) |
| Immersion Depth |
1 m |
| Immersion Test Mating |
Mated |
| Immersion Test Method |
IEC 60529:2001, IP68 |
| Moisture Resistance Test Method |
IEC 60068-2-3 |
| Mechanical Shock Test Method |
IEC 60068-2-27 |
| Thermal Shock Test Method |
IEC 60068-2-14 |
| Vibration Test Method |
IEC 60068-2-6 |
| Corrosion Test Method |
IEC 60068-2-11 |
| |
| Standard Conditions |
| Attenuation, Ambient Temperature |
20 °C | 68 °F |
| Average Power, Ambient Temperature |
40 °C | 104 °F |
| Average Power, Inner Conductor Temperature |
100 °C | 212 °F |
| Frequency Band |
VSWR |
Return Loss (dB) |
| 0–960 MHz |
1.05 |
32.00 |
| 960–2200 MHz |
1.08 |
28.80 |
| 2200–2700 MHz |
1.08 |
28.20 |
| 2700–4000 MHz |
1.08 |
28.00 |
| 4000–6000 MHz |
1.25 |
19.00 |
| 6000–8000 MHz |
1.43 |
15.00
|
