L6TDM-PS Andrew 7/16 DIN Male Positive Stop™ for 1-1/4" LDF6-50 Cable

L6TDM-PS Andrew 7/16 DIN Male Positive Stop™ for 1-1/4"  LDF6-50 Cable

General Specifications

• Interface 7-16 DIN Male
• Body Style: Straight
• Brand: HELIAX® | Positive Stop™
• Mounting Angle: Straight

Electrical Specifications

• Connector Impedance: 50 ohm
• Operating Frequency Band: 0 – 3300 MHz
• Cable Impedance: 50 ohm
• 3rd Order IMD, typical: -120 dBm @ 910 MHz
• 3rd Order IMD Test Method: Two +43 dBm carriers
• RF Operating Voltage, maximum (vrms): 1415.00 V
• dc Test Voltage: 4000 V
• Outer Contact Resistance, maximum: 1.50 mOhm
• Inner Contact Resistance, maximum: 0.80 mOhm
• Insulation Resistance, minimum: 5000 MOhm
• Average Power: 3.0 kW @ 900 MHz
• Peak Power, maximum: 40.00 kW
• Insertion Loss, typical: 0.05 dB
• Shielding Effectiveness: -130 dB

Mechanical Specifications

• Outer Contact Attachment Method: Ring-flare
• Inner Contact Attachment Method: Captivated
• Outer Contact Plating: Trimetal
• Inner Contact Plating: Silver
• Attachment Durability: 25 cycles
• Interface Durability: 500 cycles
• Interface Durability Method: IEC 61169-16:9.5
• Connector Retention Tensile Force: 1779 N | 400 lbf
• Connector Retention Torque: 10.85 N-m | 96.00 in lb
• Insertion Force: 200.17 N | 45.00 lbf
• Insertion Force Method: IEC 61169-1:15.2.4
• Pressurizable: No
• Coupling Nut Proof Torque: 24.86 N-m | 220.00 in lb
• Coupling Nut Retention Force: 1000.85 N | 225.00 lbf
• Coupling Nut Retention Force Method: MIL-C-39012C-3.25, 4.6.22

Dimensions

• Nominal Size: 1-1/4 in
• Diameter: 51.21 mm | 2.02 in
• Length: 92.00 mm | 3.62 in
• Weight: 592.00 g | 1.31 lb

Environmental Specifications

• Operating Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
• Storage Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
• Immersion Depth: 1 m
• Immersion Test Mating: Unmated
• Immersion Test Method: IEC 60529:2001, IP68
• Water Jetting Test Mating: Unmated
• Water Jetting Test Method: IEC 60529:2001, IP66
• Moisture Resistance Test Method: MIL-STD-202F, Method 106F
• Mechanical Shock Test Method: MIL-STD-202F, Method 213B, Test Condition C
• Thermal Shock Test Method: MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
• Vibration Test Method: MIL-STD-202F, Method 204D, Test Condition B
• Corrosion Test Method: MIL-STD-1344A, Method 1001.1, Test Condition A

Standard Conditions

• Attenuation, Ambient Temperature: 20 °C | 68 °F
• Average Power, Ambient Temperature: 40 °C | 104 °F

Return Loss/VSWR

Frequency Band      VSWR      Return Loss (dB)
50–1000 MHz           1.02             39.00
1010–2200 MHz       1.03             37.00
2210–3300 MHz       1.05             32.00

MFR: Andrew
New Old Stock