Details
RFA-4005-20 RF Industries Crimping Tool Handle. See die sets below.
The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors ratchet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism.
Available Dies:
RFA-4005-01 - CRIMPS RG-58, -59,-142,-8X, PROFLEX
RFA-4005-02 - CRIMPS RG-8,-213, BELDEN 9913
RFA-4005-04 - CRIMPS RG-58,-59,-62/U, CP-88, CP-89
RFA-4005-06 - CRIMPS RG-59,-6, & F-TYPE (CATV)
RFA-4005-07 - FOR RG-174/U. RG-316/U, LMR 100A CABLES
RFA-4005-08 - CRIMPS RG-59, BELDEN 8281
RFA-4005-09 - CRIMPS RG-174, RG-188, RG-316, MINI 59/U Cables
RFA-4005-10 - CRIMPS RG-8, -11, -213, N SERIES
RFA-4005-14 - CRIMPS BELDEN 9913, LMR-400; .429, .118 HEX
Paladin 1300 series and Amphenol 47-10000 are similar handles. Dies above will work on these models
MFR: RF Industries
You may also be interested in the following product(s)
-
RFA-4005 RF Industries Crimping Tool Kit in Hard Case
$159.91 -
RFA-4005-01 RF Industries Die Set for RFA-4005-20 Crimp Handle
$32.91 As low as: $31.26 -
RFA-4005-02 RF Industries Die Set for RFA-4005-20 Crimp Handle
$32.91 As low as: $31.26 -
RFA-4005-520 RF Industries Coax Crimp tool and Die Set with Stripping Tool
$333.91
Additional Information
| Featured Product | No |
|---|---|
| Made in the USA | No |
| GTIN | No |
| ISBN | No |
| NATO Stock Number | No |
| Manufacturer Part Number | No |
| Manufacturer | RF Industries |
| Condition | New |
| NOS | No |
| Call For Price | No |
| Manufacturer Name | RF INDUSTRIES |
