TC-1 High Current Filter Choke, 0.003 Henry, 1000ma DC., Vintage (NOS)
>> Inductance measured at 1 volt 60 Hz, Inductance tolerance - Minus 15%, Plus 50%.
>> Normally used in low voltage, high current D.C. power supply filter applications, where low voltage drop across the filter and good voltage regulation is required, without any tyype of voltage regulator.
Inductance: 0.003 Henries
DC ma: 1000
DC Resistance (Ohms): 0.20
Case Style: A2
Insulation Test RMS Volts: 1000
Dimensions Inches: 1.25 H x 1.5 W x 1.12 D
Mounting Hole Center to Center: 1.19/0.44 in.
Weight lbs: 0.3
MFR: Stancor (United Technologies - Hamliton Standard Controls)
Limited Quantity Available. New Old Stock. NOTE: Picture for reference only. Cosmetics may vary.
|Made in the USA||No|