Adapters
We stock full range of In Series and Between Series Adapters from the Industries best such as Amphenol, RF Industries, Aeroflex, ERI, etc. Please find the style adapter in the catagories below and click on that catagory. Each Catagory may have various styles so choose on the required series adapter needed.
If you do not find what you require, please contact our sales office for more info.
Please click on an ADAPTER subcategory.
LOW PIM |
7/16 DIN |
4.3-10 |
||
BNC |
C Adapters |
EIA Flange |
Type F |
FME |
HN |
Type N |
LC |
Mini-UHF |
RCA Phono |
SMA |
|
UHF (PL-259 or SO-239)  |
||
|
|
NMO
|
Universal AC |
-
J281A Hewlett Packard WR137 Waveguide C Band Adapter to Type-N Female Connector (Pull)
$98.90 -
-
LP-BFDN-CW Times Microwave Universal Mount Adapter Bracket
$13.91The protector must be connected to ground through a double "D" hole in a conductive surface entry panel, or an optional LP-BFDN-CW bracket bonded to a grounded plate (shown below), or a large gauge wire with minimum bends crimped to the supplied lug nut on the connector. The level of protection with any protector is most influenced by the quality of the attached earth ground system.
MFR: Times Microwave
SKU: LP-BFDN-CW -
-
-
5075 JFW 50 Ohm BNC Male to 75 Ohm BNC Female Impedance Adapter (Pull)
$25.91 -
4503 Narda Crystal Detector BNC Female to SMA Male 0.01-18Ghz (Pull)
$124.91 -
ZM-57 Texscan 75 ohm BNC Female to 50 ohm BNC Male Impedance Adapter (Pull)
$17.91 -
9176064 Raytheon WR90 Waveguide Flange to 2.92mm Female Adapter 8.2GHz to 12.4GHz (Pull)
$244.90 -
STD050-45-5 Electronics Research 7/8" EIA Flange Adapter
$454.91STD050-45-5 Electronics Research 7/8" EIA Flange Adapter
The STD050-45-5 part comes with a factory-welded flange on one end and for the other end the customer can use an RLA000-27 solder-on flange or the RLA000-38 clamp-on flange. The clamp-on is non-pressurizable.
MFR: Electronics Research Inc.
SKU: STD050-45-5
