1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Attenuators

Please choose from the following ATTENUATOR Sub-Catagory choices:

FIXED
Fixed Attenuator
ROTARY
Rotary Attenuators
TOGGLE
Toggle Attenuator

NOTE: Attenuation expressed in decibels of relative power.

A 3 dB pad reduces power to one half, 6 dB to one fourth, 10 dB to one tenth, 20 dB to one hundredth, 30 dB to one thousandth and so on. For voltage you double the dBs so for example 6 dB is half in voltage.

EXAMPLE: Calculating 50 Watt Attenuator into dB:

3db:  50 x 0.50 = 25 watt; 6db:  50 x 0.25 = 12.5 watt; 10db: 50 x 0.10 = 5 watt; 20db: 50 x 0.01 = 0.5 watt; 30db: 50 x 0.001 = 0.05 watt; 40db: 50 x 0.0001 = 0.005 watt.

 

 

List  Grid 

per page
Set Descending Direction
  1. CAT-20 Mini Circuitry In-Line 20db Attenuator (Pull)

    CAT-20 Mini Circuitry In-Line 20db Attenuator (Pull)

    $44.95

    CAT-20 Mini Circuitry In-Line 20db Attenuator BNC Male to BNC Female, Max 1 Watt Input
    Used Good Condition * No longer available for export
    MFR: Mini Circuitry
    SKU: CAT-20

  2. MDC2017S-40 Midisco DC-3GHz 0-10 Db Step-up Attenuator (Pull)

    MDC2017S-40 Midisco DC-3GHz 0-10 Db Step-up Attenuator (Pull)

    $79.95

    MDC2017S-40 Midisco DC-3GHz 0-10 dB Step-up Attenuator. 1dB Step Step-up attenuator. SMA Female Connectors
    Used Good condition * No longer available for export
    MFR: Midisco
    SKU: MDC2017S-40

  3. RA-53 Texscan 0-1dB 1GHz Variable Attenuator With BNC Female Connectors (Pull)

    RA-53 Texscan 0-1dB 1GHz Variable Attenuator With BNC Female Connectors (Pull)

    $49.95

    RA-53 Texscan 0-1dB 1GHz Variable Attenuator With BNC Female Connectors. 0.1 Step Attenuator
    Used good working condition * No longer available for export
    MFR: Texscan
    SKU: RA-53


  4. 2N-03-320 Inmet 2 Watt 3dB Type-N (M)-(F) Fixed Attenuator (NOS)

    2N-03-320 Inmet 2 Watt 3dB Type-N (M)-(F) Fixed Attenuator (NOS)

    $17.91

    Frequency: 2.5 GHz
    Decibles: 3
    Attenuation accuracy from 50-800MHz is +/-0.5dB Max
    VSWR from 50-800MHz is 1.15:1 Max
    Input Power 2 Watts @ 25oC
    Peak Power 250 Watts Maximum
    Impedance: 50 Ohms
    Operating Temp Range: -65oC to +125oC
    Length: 1.76 inches
    Outside Diameter: 0.62 inches
    New Old Stock * No longer available for export
    MFR: Inmet
    SKU: 2N-03-320

    Made in the USA

  5. AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)

    AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)

    $79.91

    Application Design: Transmission Line
    Body Surface Treatment: Silver Plated, Qq-S-365
    Input Impedance Rating In Ohms: 50.0
    Output Impedance Rating In Ohms: 50.0
    Power Rating: 4.0 Watts Average
    RF Signal Attenuation In Decibels: 3.0
    Voltage Standing Wave Ratio Frequency Range: +0.0/+2.5 Gigahertz

    NSN: 5985-00-739-1201
    Used * Clean * No longer available for export
    MFR: Microlab / FXR
    SKU: AA-03N-P

    Made in the USA
  6. 766-30 Narda 30dB 20watt DC-4GHz 50 Ohm N-Male to N-Female Medium Power Attenuator (Pull)

    766-30 Narda 30dB 20watt DC-4GHz 50 Ohm N-Male to N-Female Medium Power Attenuator (Pull)

    $112.91

    These parts are clean used parts tested to factory spec. Picture is for reference. Cosmetic condition will vary slightly. 

    • VSWR: 1.35 Maximum
    • Average Power: 20 Watts
    • Attenuation: 30dB Nominal
    • Peak Power: 1 Kilowatt

    Clean used * No longer available for export
    MFR: Narda

    SKU: 766-30-P

    Data Sheet

  7. 391-7 Midwest Microwave 7dB 10w DC-12.4GHz Fixed Attenuator (Pull)

    391-7 Midwest Microwave 7dB 10w DC-12.4GHz Fixed Attenuator (Pull)

    $49.91

    • Frequency Range: DC-12.4GHz
    • Attenuation: 10dB Nominal
    • Power : Average - 2 W Max

    Used * No longer available for export
    MFR: Midwest Microwave
    SKU: 391-7-P

    Note: Picture is for reference only

  8. 391-30 Midwest Microwave 30dB 5w DC-12.4GHz Type-N Fixed Attenuator (Pull)

    391-30 Midwest Microwave 30dB 5w DC-12.4GHz Type-N Fixed Attenuator (Pull)

    $49.91

    • Frequency Range: DC-12.4GHz
    • Attenuation: 30dB Nominal
    • Power : Average - 5w Max

    Used * No longer available for export
    MFR: Midwest Microwave
    SKU: 391-30-P

    Note: Picture is for reference only


  9. FP-75 Texscan (Trilithic) 75 Ohm 10dB BNC Male/Female Attenuator (Pull)

    FP-75 Texscan (Trilithic) 75 Ohm 10dB BNC Male/Female Attenuator (Pull)

    $12.91

    Used * No longer available for export
    MFR: Texscan (Trilithic)
    SKU: FP-75-10-P

    Made in the USA

  10. FP-50 Texscan (Trilithic) 50 Ohm 10dB BNC Male/Female Attenuator (Pull)

    FP-50 Texscan (Trilithic) 50 Ohm 10dB BNC Male/Female Attenuator (Pull)

    $12.91

    Used * No longer available for export
    MFR: Texscan (Trilithic)
    SKU: FP-50-10-P

    Made in the USA

Items 21 to 30 of 172 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5