Attenuators
Please choose from the following ATTENUATOR Sub-Catagory choices:
FIXED |
ROTARY |
TOGGLE |
NOTE: Attenuation expressed in decibels of relative power.
A 3 dB pad reduces power to one half, 6 dB to one fourth, 10 dB to one tenth, 20 dB to one hundredth, 30 dB to one thousandth and so on. For voltage you double the dBs so for example 6 dB is half in voltage.
EXAMPLE: Calculating 50 Watt Attenuator into dB:
3db: 50 x 0.50 = 25 watt; 6db: 50 x 0.25 = 12.5 watt; 10db: 50 x 0.10 = 5 watt; 20db: 50 x 0.01 = 0.5 watt; 30db: 50 x 0.001 = 0.05 watt; 40db: 50 x 0.0001 = 0.005 watt.
-
-
-
90513-8 Stoddart Type-N 50 Ohm 8 dB 10w Fixed Attenuator (Pull)
$49.91 -
50043-1180 Type-N 3dB Fixed Tee Attenuator (2CP2TEE) (NOS)
$59.90 -
612-20-1 Meca Type-N Male/Female Fixed Attenuator 20dB 2W DC-4 GHz (Pull)
$59.91 -
Model 219 Midwest Microwave 6db 2w DC-18GHz Type-N Fixed Attenuator (Pull)
$49.91 -
-
-
AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)
$79.91Application Design: Transmission Line
Body Surface Treatment: Silver Plated, Qq-S-365
Input Impedance Rating In Ohms: 50.0
Output Impedance Rating In Ohms: 50.0
Power Rating: 4.0 Watts Average
RF Signal Attenuation In Decibels: 3.0
Voltage Standing Wave Ratio Frequency Range: +0.0/+2.5 GigahertzNSN: 5985-00-739-1201
Used * Clean * No longer available for export
MFR: Microlab / FXR
SKU: AA-03N-PMade in the USA -
2N-03-320 Inmet 2 Watt 3dB Type-N (M)-(F) Fixed Attenuator (NOS)
$17.91Frequency: 2.5 GHz
Decibles: 3
Attenuation accuracy from 50-800MHz is +/-0.5dB Max
VSWR from 50-800MHz is 1.15:1 Max
Input Power 2 Watts @ 25oC
Peak Power 250 Watts Maximum
Impedance: 50 Ohms
Operating Temp Range: -65oC to +125oC
Length: 1.76 inches
Outside Diameter: 0.62 inches
New Old Stock * No longer available for export
MFR: Inmet
SKU: 2N-03-320Made in the USA
