Attenuators

Please choose from the following ATTENUATOR Sub-Catagory choices:

NOTE: Attenuation expressed in decibels of relative power.

A 3 dB pad reduces power to one half, 6 dB to one fourth, 10 dB to one tenth, 20 dB to one hundredth, 30 dB to one thousandth and so on. For voltage you double the dBs so for example 6 dB is half in voltage.

EXAMPLE: Calculating 50 Watt Attenuator into dB:

3db: 50 x 0.50 = 25 watt; 6db: 50 x 0.25 = 12.5 watt; 10db: 50 x 0.10 = 5 watt; 20db: 50 x 0.01 = 0.5 watt; 30db: 50 x 0.001 = 0.05 watt; 40db: 50 x 0.0001 = 0.005 watt.

100337-F Logimetrics Rotary Step Attenuator BNC (Pull)

$109.91

Rotary Step Attenuator 0-120 db/10db Step 0.5 Watts DC-500 mhz BNC Female Connectors
Clean Used Condition * No longer available for export
MFR: Logimetrics
SKU: 100337-F

Made in the USA
- | Add to Compare
50DR-079 JFW Dual Concentric Rotary Attenuator 0-30dB/1dB Steps (Pull)

$199.91

Power: 1 watt / 500w peak
Freq: DC-2.2 GHz
dB range: 0-30dB/1 dB steps
Size: 5" Long x 1.25" Diameter

Used * No longer availabale for export
MFR:JFW
SKU: 50DR-079
- | Add to Compare
50R-019-SMA JFW Rotary Attenuator 0-10dB -1dB steps DC-2200 MHz 2 Watt, SMA Female Connectors (Pull)

$119.91

50R-019-SMA JFW Rotary Attenuator, 0-10dB, 1dB steps, 2 Watt, DC-2200 MHz, SMA Female/Female Connectors
Used clean * No longer available for export
MFR: JFW
SKU: 50R-019-SMA
- | Add to Compare
RA50BNC Texscan Rotary Attenuator 0-10dB / 1dB Steps DC-2 GHz BNC Female (Pull)

$95.91

dB Range: 0-10dB / 1dB Steps
Frequency: DC-2 ghz
Power: 1 watt / 500 watt Peak

Clean Used Condition * No longer available for export
MFR: Texscan
SKU: RA50BNC-TEX
- | Add to Compare
TA-53 BNC Trilithic Rotary Attenuator, 0-1dB, BNC Female/Female (Pull)

$79.95

TA53 BNCnbsp; Rotary Attenuator, 0-1dB, 0.1dB steps, 1 Watt, 50 ohm, BNC Female/Female
Used * No longer available for export
MFR: Trilithic
SKU: TA-53-BNC
- | Add to Compare
MDC2017S-40 Midisco DC-3GHz 0-10 Db Step-up Attenuator (Pull)

$79.95

MDC2017S-40 Midisco DC-3GHz 0-10 dB Step-up Attenuator. 1dB Step Step-up attenuator. SMA Female Connectors
Used Good condition * No longer available for export
MFR: Midisco
SKU: MDC2017S-40
- | Add to Compare
RA-53 Texscan 0-1dB 1GHz Variable Attenuator With BNC Female Connectors (Pull)

$49.95

RA-53 Texscan 0-1dB 1GHz Variable Attenuator With BNC Female Connectors. 0.1 Step Attenuator
Used good working condition * No longer available for export
MFR: Texscan
SKU: RA-53
- | Add to Compare
N0682-20 ARRA 1 Watt DC to 100 MHz 20 dB Continuously Variable Attenuator (Pull)

$59.91
- Frequency: DC to 100 MHz
- Attenuation Range: 20 dB
- Power: 1 W
- Impedance: 50 Ohms
Used * No longer available for export
MFR: ARRA Inc.
SKU: N0682-20-P

Made in the USA
- | Add to Compare
355D Hewlett Packard VHF Variable Attenuator 1000MHz 120dB (Pull)

$189.90
Used to measure gain, attenuation, frequency response, and to calibrate signal sources.
- Attenuation: 120 dB in 10-dB steps.
- Frequency Range: DC to 1000 MHz.
Used * No longer available for export
MFR: Hewlett Packard
SKU: 355D-P

Data Sheet
- | Add to Compare
355C Hewlett Packard VHF Variable Attenuator 1000MHz 12dB (Pull)

$189.90
Used to measure gain, attenuation, frequency response, and to calibrate signal sources.
- Attenuation: 12 dB in 1-dB steps.
- Frequency Range: DC to 1000 MHz.
Used * No longer available for export
MFR: Hewlett Packard
SKU: 355C-P

Data Sheet
- | Add to Compare

Attenuators

Buy with confidence