Attenuators
Please choose from the following ATTENUATOR Sub-Catagory choices:
FIXED![]() |
ROTARY![]() |
TOGGLE![]() |
NOTE: Attenuation expressed in decibels of relative power.
A 3 dB pad reduces power to one half, 6 dB to one fourth, 10 dB to one tenth, 20 dB to one hundredth, 30 dB to one thousandth and so on. For voltage you double the dBs so for example 6 dB is half in voltage.
EXAMPLE: Calculating 50 Watt Attenuator into dB:
3db: 50 x 0.50 = 25 watt; 6db: 50 x 0.25 = 12.5 watt; 10db: 50 x 0.10 = 5 watt; 20db: 50 x 0.01 = 0.5 watt; 30db: 50 x 0.001 = 0.05 watt; 40db: 50 x 0.0001 = 0.005 watt.
-
693-1 Weinschel Attenuator 1.2 dB at 1.5 GHz 30 Watts (Pull)
$189.95 -
PE7010-20 Pasternack 10 Watt 20 dB Fixed Attenuator (Pull)
$196.95 -
-
CAT-20 Mini Circuitry In-Line 20db Attenuator (Pull)
$44.95 -
-
MDC2017S-40 Midisco DC-3GHz 0-10 Db Step-up Attenuator (Pull)
$79.95 -
2N-03-320 Inmet 2 Watt 3dB Type-N (M)-(F) Fixed Attenuator (NOS)
$17.91Frequency: 2.5 GHz
Decibles: 3
Attenuation accuracy from 50-800MHz is +/-0.5dB Max
VSWR from 50-800MHz is 1.15:1 Max
Input Power 2 Watts @ 25oC
Peak Power 250 Watts Maximum
Impedance: 50 Ohms
Operating Temp Range: -65oC to +125oC
Length: 1.76 inches
Outside Diameter: 0.62 inches
New Old Stock * No longer available for export
MFR: Inmet
SKU: 2N-03-320Made in the USA -
AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)
$79.91Application Design: Transmission Line
Body Surface Treatment: Silver Plated, Qq-S-365
Input Impedance Rating In Ohms: 50.0
Output Impedance Rating In Ohms: 50.0
Power Rating: 4.0 Watts Average
RF Signal Attenuation In Decibels: 3.0
Voltage Standing Wave Ratio Frequency Range: +0.0/+2.5 GigahertzNSN: 5985-00-739-1201
Used * Clean * No longer available for export
MFR: Microlab / FXR
SKU: AA-03N-PMade in the USA -
766-30 Narda 30dB 20watt DC-4GHz 50 Ohm N-Male to N-Female Medium Power Attenuator (Pull)
$112.91 -
391-7 Midwest Microwave 7dB 10w DC-12.4GHz Fixed Attenuator (Pull)
$49.91