Attenuators
Please choose from the following ATTENUATOR Sub-Catagory choices:
FIXED |
ROTARY |
TOGGLE |
NOTE: Attenuation expressed in decibels of relative power.
A 3 dB pad reduces power to one half, 6 dB to one fourth, 10 dB to one tenth, 20 dB to one hundredth, 30 dB to one thousandth and so on. For voltage you double the dBs so for example 6 dB is half in voltage.
EXAMPLE: Calculating 50 Watt Attenuator into dB:
3db: 50 x 0.50 = 25 watt; 6db: 50 x 0.25 = 12.5 watt; 10db: 50 x 0.10 = 5 watt; 20db: 50 x 0.01 = 0.5 watt; 30db: 50 x 0.001 = 0.05 watt; 40db: 50 x 0.0001 = 0.005 watt.
-
50-20S Weinschel Type-N Attenuator 20dB DC-3Ghz (Pull)
$44.90 -
50-10 Weinschel Type-N Attenuator 10dB DC-3Ghz (Pull)
$44.90 -
50-10 Weinschel Type-N Attenuator 10dB DC-3Ghz (NOS)
$59.90 -
50-20 Weinschell Type-N Attenuator 20dB DC-3Ghz (NOS)
$59.90 -
352-097-003 Ultimate Source Type-N Male/Female Attenuator 3dB 2W (NOS)
$59.91 -
A8210N KDI Type-N Male/Female Attenuator 10dB 10W (NOS)
$69.91 -
FY-A03 Microlab Low PIM Attenuator 30dB 2496-2690 MHz (NOS/NIB)
$249.90 -
-
766-30 Narda 30dB 20watt DC-4GHz 50 Ohm N-Male to N-Female Medium Power Attenuator (Pull)
$112.91 -
AA-03N Microlab / FXR Fixed Attenuator 4W 3dB DC-1Ghz (Pull)
$79.91Application Design: Transmission Line
Body Surface Treatment: Silver Plated, Qq-S-365
Input Impedance Rating In Ohms: 50.0
Output Impedance Rating In Ohms: 50.0
Power Rating: 4.0 Watts Average
RF Signal Attenuation In Decibels: 3.0
Voltage Standing Wave Ratio Frequency Range: +0.0/+2.5 GigahertzNSN: 5985-00-739-1201
Used * Clean * No longer available for export
MFR: Microlab / FXR
SKU: AA-03N-PMade in the USA
