Chokes & Inductors

• Rated Current Amps (RMS): 25.0
• mH: 1.18
• Lp mH (Minimum): 0.80
• LL mH (Typical): 12
• DCR Ohm (Maximum): 0.005
• Dielectric Strength Volts (RMS): 3000
• Lead Diameter (Nominal): 0.081"

MFR: Vitec
SKU: 54P2923

• Will work on 160m systems
• Turn Quantity: 48 single component single winding
• Mounting Hole Diameter: 0.221 inches single group
• Body Length: 7.000 inches
• Body Outside Diameter: 3.569 inches

MFR: Continental Electronics Corporation
SKU: 104195-1

• Coil: 4-1/4" x 3" Outside diameter - 6 turns per inch
• Overall length: 6-7/32"
• Overall Diameter: 4-3/16"
• Silver plated coil

Used * No longer available for export
MFR: Johnson
SKU: 232-0712-001-P

New Old Stock * New In Box * No longer available for export
MFR: J.W. Miller Division of Bell Industries
SKU: RFC-50

New Old stock * New In Box * No longer available for export
MFR: J.W. Miller
SKU: 43A823CBI

Designed primarily for amateur use of low power transmitters. Prevents interference from high frequency currents.

New Old Stock * New In Box * No longer available for export
MFR: Ohmite Manufacturing Company
SKU: Z-21-OHMITE

Ceramic Pilar Choke / Inductor 12.4μh (NOS)

New Old Stock * No longer available for export
SKU: CPC-12.4-NOS

CZR240N59 5 Pi Pillar Choke 6.2mH (Pull)

Used * No longer available for export
SKU: CZR240N59-P

Ceramic Pilar Choke / Inductor 7.5μh (Pull)

Used * No longer available for export
SKU: CPC-17.5-P