1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable

RG - Belden Coax Cables
RG Cable
CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled

Rotor Cable
Rotor Cable
Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Descending Direction
  1. RB-CST Ripley Replacement Blade Kit for CST Series Strip Tools (3192-086)

    RB-CST Ripley Replacement Blade Kit for CST Series Strip Tools (3192-086)

    $50.91

    Replacement blades for CST 195/200, 240, 300, 400, 500 and 600 series stripping tools for Times Microwave LMR cables (5 ea. - 1st cut, 1 ea. 2nd cut)
    MFR Part #: 43293 (3192-086 RB-CST)
    MFR: Ripley
    SKU: RB-CST

  2. 244377 Andrew Torque Wrench for 7/16 DIN Connectors

    244377 Andrew Torque Wrench for 7/16 DIN Connectors

    $114.91

    For coupling torque of 7­16 DIN connectors
    1-­1/4 in opening
    MFR: Andrew
    SKU: 244377

  3. TW-78-EZFC Torque Wrench for 7/8 in EZfit® connectors, 34 mm, Andrew

    TW-78-EZFC Torque Wrench for 7/8 in EZfit® connectors, 34 mm, Andrew

    $115.95

    TW-78-EZFC Torque Wrench for 7/8 in EZfit® Connectors, 34 mm, MFR: Andrew

  4. CST600 - Prep Tool for LMR-600 Crimp/Clamp Style Connectors , Ripley

    CST600 - Prep Tool for LMR-600 Crimp/Clamp Style Connectors , Ripley

    $114.95

    CST600  All-In-One Combination Cable Prep Tool for LMR-600 Coax, MFR: Ripley (For Times Microwave)

    NOTE: FOR TIMES MICROWAVE CONNECTORS ONLY. 

  5. RFA-4420 RF Industries Cable Deburring and Prep Tool

    RFA-4420 RF Industries Cable Deburring and Prep Tool

    $63.91

    Deburs and scrapes Insulation from cable
    Great tool to help clean cable for connector installation.
    Replacement blade kit (RFA4420RB)
    MRF: RF Industries
    SKU: RFA-4420

  6. RFA-4400-01C RF Industries Replacement Blade Cartridge for RFA-400-01

    RFA-4400-01C RF Industries Replacement Blade Cartridge for RFA-400-01

    $13.51

    For cable type RG-213/U, RG-8/U, RG-214/U, LMR-400
    MFR: RF Industries
    SKU: RFA-4400-01C

  7. RFA-4215 RF Industries Wire Stripper / Cutter

    RFA-4215 RF Industries Wire Stripper / Cutter

    $11.91

    For 10 to 22 AWG cable
    MFR: RF Industries
    SKU: RFA-4215

  8. RFA-4205 RF Industries Cable Cutter

    RFA-4205 RF Industries Cable Cutter

    $19.91

    Cable cutter for Copper and Aluminum cable.
    Cuts up to 2 awg (38mm)
    MFR: RF Industries

    SKU: RFA-4205

  9. CST-400 Prep Tool for LMR-400 Crimp/Clamp Style Connectors, Ripley

    CST-400 Prep Tool for LMR-400 Crimp/Clamp Style Connectors, Ripley

    $108.91

    CST-400  All-In-One Combination Cable Prep Tool for LMR-400 Coax, will work on Crimp and Clamp connectors made by Times Microwave only. 

    MFR: Ripley for Times Microwave.

  10. RFA-4400-01 RF Industries Stripping Tool for LMR400 Type Cable

    RFA-4400-01 RF Industries Stripping Tool for LMR400 Type Cable

    This stripping tool works exclusive to RF Industries and Amphenol connectors only.  
    NOTE: Will not work on Times Microwave connectors.  See CST400 if using Times Microwave connectors.

    Features:
    • Ergonomic design
    • Cut jacket, braid & dielectric in one step
    • Tool steel twin blades in easily replaced cartridges 
    • Cartridges configured forspecific LMR-400 cable connectors
    • No guesswork 
    • Cartridges interchangeable within series

    MFR: RF Industries
    SKU: RFA-4400-01

Items 1 to 10 of 86 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5