1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Coaxial Cable & Accessories

Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss.  Here is more information on Coaxial Cables

Custom Cables and Custom Cable Assemblies

RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.

Coaxial Cables and Accessories

Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )

Heliax Type Cable
Heliax

Waveguide (Elliptical Wavegude)

Waveguide

Heliax Specials
Heliax Specials

LMR- Times Microwave Coax Cables
LMR Cable

RG - Belden Coax Cables
RG Cable
CNT - Andrew Coax Cables
CNT Cables

RG - Other brand Coax Cables
RG Other Cables

Preassembled Coax Cables
Pre Assembled

Rotor Cable
Rotor Cable
Coaxial Cable Tools
Cable Tools

Grounding Kits

Grounding Kit

Ground Buss Bars

Ground Buss Bar

Cable Entry Boot

Cable Entry Boot

Hanger Kits

Hanger Kit

Hoisting Grip

Hoisting Grip

Mounting Hardware

Mounting Hardware

LMR® is a registered trademark of Times Microwave Systems.

Here is a list of which cables go in which cable groups. PDF

List  Grid 

per page
Set Ascending Direction
  1. 47-10210 Amphenol Crimp Tool Set for Cable Group I

    47-10210 Amphenol Crimp Tool Set for Cable Group I

    Hex Cavity Dimensions are .118, .429
    Will work on cable Group I for both Ferrule and center pin. 
    Will work on Cable Group E & F for Ferrule
    Cable Types: LMR400, 9913 (Cable Group I), and RG8, RG213, RG393, RG214 (Cable Group E & F)
    MFR: Amphenol
    SKU: 47-10210

  2. L7SGRIP Andrew Hoisting Grip for AVA7-50

    L7SGRIP Andrew Hoisting Grip for AVA7-50

    $37.91

    L7SGRIP Hoisting grip for AVA7-50

    MFR: Andrew
    SKU: L7SGRIP

  3. EC4-50-PL-BLU Eupen 1/2" Blue Corrugated Copper with Plenum Rated Jacket

    EC4-50-PL-BLU Eupen 1/2" Blue Corrugated Copper with Plenum Rated Jacket

    Cable with UV Resistant Low Smoke Flame Retardant Jacket
    UL-910 / NFPA 262, CATVP rated (Plenum)
    NOTE: White Jacket available.  Part # EC4-50-PLW
    Sold by the foot - Minimum Order 5 Feet

    • Inner conductor 
    Material:  copper clad aluminum
    Diameter, in (mm):  0.19 (4.8)
    • Dielectric
    Material: polyethylene
    Diameter, in (mm): 0.464 (11.8)
    • Outer conductor
    Material:  corrugated copper tube
    Diameter, in (mm): 0.54 (13.8)
    • Outer sheath
    Material: black polyethylene
    Thickness, in (mm): 0.035 (0.9)
    Diameter, in (mm): 0.61 (15.6)

    MFR: Eupen
    SKU: EC4-50-PL-BLU

    For more info, please see the data sheet on file.

  4. 241088-7 Andrew Grounding Kit for 5/8" and 7/8" Corrugated Cable and Elliptical Waveguide 85, 90, 127A, and 132 (NOS)

    241088-7 Andrew Grounding Kit for 5/8" and 7/8" Corrugated Cable and Elliptical Waveguide 85, 90, 127A, and 132 (NOS)

    $36.91

    General Specifications
    Grounding Kit Type: Standard Grounding Kits
    Cable Type: Corrugated | Elliptical waveguide
    Ordering Note: CommScope® non-standard product
    Color: Black
    Bonding Conductor Material: Copper
    Bonding Conductor Wire Size: 6 gauge
    Bonding Conductor Jacketing Material: PVC
    Grounding Strap Material: Copper
    Includes: Grounding kit | Hardware | Lug | One roll of 2 in PVC tape | One roll of 24 in butyl rubber tape
    Lug Attachment: Factory attached
    Lug Type: Two-hole lug
    Package Quantity: 1
    Rivet Material: Copper

    New Old Stock * No longer available for export
    MFR: Andrew

  5. 241088-6 Andrew Standard Grounding Kit for 1/2" Corrugated Coaxial Cable and Elliptical Waveguide 180 and 220 (NOS)

    241088-6 Andrew Standard Grounding Kit for 1/2" Corrugated Coaxial Cable and Elliptical Waveguide 180 and 220 (NOS)

    $29.91

    General Specifications
    Grounding Kit Type: Standard Grounding Kits
    Cable Type: Corrugated | Elliptical waveguide
    Ordering Note: CommScope® non-standard product
    Color: Black
    Bonding Conductor Material: Copper
    Bonding Conductor Wire Size: 6 gauge
    Bonding Conductor Jacketing Material: PVC
    Grounding Strap Material: Copper
    Includes: Grounding kit | Hardware | Lug | One roll of 2 in PVC tape | One roll of 24 in butyl rubber tape
    Lug Attachment: Factory attached
    Lug Type: Two-hole lug
    Package Quantity: 1
    Rivet Material: Copper

    New Old Stock * No longer available for esport
    MFR: Andrew

  6. L4SGRIP Andrew/CommScope Support Hoisting Grip for 1/2 in Coaxial Cable

    L4SGRIP Andrew/CommScope Support Hoisting Grip for 1/2 in Coaxial Cable

    $21.90

    Support Hoisting Grip for 1/2 in coaxial cable
    MFR: Andrew / Commscope
    SKU: L4SGRIP

  7. SSH-12 Commscope Stackable Snap-In Hanger Kit for 1/2" Heliax Cable - 10/Pkg

    SSH-12 Commscope Stackable Snap-In Hanger Kit for 1/2" Heliax Cable - 10/Pkg

    • Attach Without Hardware - Standard Snap-In and SnapStak™ stackable hanger kits offer quick and easy attachment of coaxial cable in all types of weather.
    • The hangers snap directly into 3/4" holes in tower support structures 0.120 to 0.150 inch thick. The heavy gauge stainless steel construction provides excellent corrosion resistance for long-term reliability.
    • SnapStak™ hangers can be stacked up to three deep when using 1/2" and 7/8" coax and up to two deep when using 1-1/4" or 1-5/8" coax.
    • The maximum recommended spacing listed are for standard conditions of 125 mph survival wind velocity and 1/2" radial ice.

    MFR: Commscope
    SKU: SSH-12

  8. SHK-12-1-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    SHK-12-1-P Andrew / CommScope Single Hanger Kit for 1/2 inch Coaxial Cable

    Single stack
    Includes hardware and angle adapter
    MFR: Andrew / Commscope
    SKU: SHK-12-1-P

     

  9. SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    $58.91

    SSHAK-3812 Stackable Snap-In Hanger Kit for 3/8" RET Cables, 10/Pkg

    MFR: Andrew / Commscope
    SKU: SSHAK-3812

     

  10. RFA4076-48  7 piece Cable Kit and Rack.  6pcs 48" Cable Assemblies and Mounting Rack.

    RFA4076-48 7 piece Cable Kit and Rack. 6pcs 48" Cable Assemblies and Mounting Rack.

    Regular Price: $79.95

    Special Price $69.95

    RFA4076-48  7 piece Cable Kit and Rack.  6pcs 48" Cable Assemblies and Mounting Rack. MFR: RF Industries

Items 111 to 120 of 513 total

Page:
  1. 10
  2. 11
  3. 12
  4. 13
  5. 14