1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Connectors - RF Coaxial

Connectors - RF Coaxial

We stock a full range of RF connector types from the industry's best, including Amphenol, RF Industries, Times Microwave, CompPro, Andrew, and more. Browse through the connector categories below and select the type you need. Each category contains various connector styles, so choose the one required for your specific application.

If you can't find what you're looking for, please contact our sales office for assistance.

NOTE: CONNECTORS ON THE WEBSITE ARE ORGANIZED BY CABLE GROUPS. PLEASE CLICK THE LINK TO FIND YOUR CABLE GROUP.

Find Cable Groups Here

PL-259
(Male UHF)
PL-259 Male UHF connector
SO-239
(Female UHF)
SO-239 Female UHF connector
7/16 DIN
7/16 DIN connector
BNC
BNC connector
C Connectors
C Connector
EIA Flange
EIA Flange connector
Type F
Type F connector
FME
FME connector
HN
HN connector
LC
LC connector
MC Card
MC Card connector
MCX & MMCX
MCX and MMCX connectors
MHV
MHV connector
Type N
Type N connectors
QDS
QDS connector

NEW COMPRESSION FIT CONNECTOR SERIES

CompPro® Series Connectors

TYPE-N Compression Connector
7/16 DIN Male Connector
TYPE-N Male Right Angle Connector
TNC Male Connector
TNC Right Angle Connector

NEW WATERPROOF CONNECTORS AND TOOLS

Strip Tool for Connectors
Crimp Handle for Connectors
Torque Wrench for Connectors
Connector Tool Kit

LMR® is a registered trademark of Times Microwave Systems.

RF Parts Company builds custom cable assemblies. If you need a custom cable, contact our sales staff with your requirements.

List  Grid 

per page
Set Ascending Direction
  1. SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I

    SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I

    $94.90

    RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.

    Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50

    Cable Types: LMR400, CNT400

    MFR: RF Industries
    SKU: SDT400-50

  2. RC400-50 Ripley Replacement Blade Cartridge for SDT400-50

    RC400-50 Ripley Replacement Blade Cartridge for SDT400-50

    $50.90

    This replacement blade kit is for the Ripley coax cable stripper SDT400-50 for CompPro® 400 connectors. SDT400-50 connector strip tool uses cassette blades that do not require adjustments.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: Ripley
    SKU: RC400-50

     

  3. IT50NM RF Industries Insertion Tool for CompPro Type-N Male Connectors

    IT50NM RF Industries Insertion Tool for CompPro Type-N Male Connectors

    $36.91

    100% machined Aluminium
    T-Insertion Tool 2-1/2" Overall Length
    Used to install COMP-NM-400.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: IT50NM 

     

  4. IT50TA RF Industries Insertion Tool for CompPro Type-N to TNC Male Connectors

    IT50TA RF Industries Insertion Tool for CompPro Type-N to TNC Male Connectors

    $36.91

    100% machined Aluminium
    T-Insertion Tool 2-1/2" Overall length. 
    Used to install COMP-NM-400 and COMP-TM-400Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: IT50TA

     

  5. TW-1412 RF Industries 19mm Hex Torque Wrench for CompPro Type-N Male Connectors

    TW-1412 RF Industries 19mm Hex Torque Wrench for CompPro Type-N Male Connectors

    $126.90

    Torque Wrench for N Male style 19mm CompPro® compression connectors. 14 in/lbs of torque.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: TW-1412

  6. TW10X14MM RF Industries 10 in/lbs Torque Wrench for CompPro TNC Male Connectors

    TW10X14MM RF Industries 10 in/lbs Torque Wrench for CompPro TNC Male Connectors

    $57.91

    For Cable Group I
    Cable Type: LMR400, CNT400
    10in/lb Torque for 14mm (9/16") 
    MFR: RF Industries
    SKU: TW10X14MM

  7. TQ-114-F18 RF Industries 1-1/4" (Hex Nut Size) 18 Ft-lbs Torque Wrench for DIN Connectors

    TQ-114-F18 RF Industries 1-1/4" (Hex Nut Size) 18 Ft-lbs Torque Wrench for DIN Connectors

    $220.91

    Torque Wrench for 7/16 DIN Male style 1/2" CompPro® compression connectors. 3/4" opening and 14 in/lbs of torque

    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: TQ-114-F18  

     

  8. COMP-NM-400 RF Industries Type-N Male Connector Assembly for Cable Group I

    COMP-NM-400 RF Industries Type-N Male Connector Assembly for Cable Group I

    $23.91 As low as: $20.49

    RF Industries Compression Type-N male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50
    MFR: RF Industries
    SKU: COMP-NM-400 


  9. 3052-1648-10 MA-COM Type- N 50 Ohm Flange Mount 1057293-1

    3052-1648-10 MA-COM Type- N 50 Ohm Flange Mount 1057293-1

    $19.95

    Item Condition: New Old Stock
    MPN: 3052-1648-10 / 1057293-1
    Model: 2 MA-Com / Amp 3052-1648-10 / 1057293-1 OSN Flange
    MFR: M/A-Com / Amp
    SKU: 3052-1648-10

    Made in the USA

  10. KA-71-02 Kings TNC Female Panel Mount Connector with Solder Cup 11GHz 50 Ohm

    KA-71-02 Kings TNC Female Panel Mount Connector with Solder Cup 11GHz 50 Ohm

    $11.91

    • Frequency: 0Hz to 11GHz
    • Impedence: 50 Ohm
    • Mounting: Panel Mount
    • Contacs:Gold Plated
    • Body: Berillium Copper

    MFR: Kings
    SKU: KA-71-02

    Made in the USA

Items 861 to 870 of 1034 total

Page:
  2. 85
  3. 86
  4. 87
  5. 88
  6. 89
Shop By

Shopping Options

Category
  1. CompPro Series
  2. PL259 (SOLDER TYPE) * SEE UHF FOR CRIMP OR CLAMP TYPE *
  3. SO-239 Female UHF Connectors * SEE UHF FOR CRIMP OR CLAMP TYPE *
  4. 7/16 DIN
  5. BNC
  6. C Connectors
  7. EIA FLANGE
  8. Type F
  9. FME
  10. HN
  11. LC
  12. MC CARD
  13. MCX & MMCX
  14. MHV
  15. Microphone Connectors
  16. Type N
  17. QDS
  18. QMA
  19. RCA
  20. Reverse Polarity
  21. Reverse Thread
  22. SMA
  23. SMB & SSMB
  24. TNC
  25. Twin Ax
  26. Mini UHF
  27. 4.3-10
  28. UG Connectors (Military Grade)
  29. UHF
  30. Replacement Crimp Ferrules
  31. Binding Post Terminals
  32. Bird Line Section
  33. 1/4" Mono Phone Connector plug
  34. End / Weather Caps
  35. Strain Relief Boots
  36. INSTALLATION OF CONNNECTORS
  37. WeatherProofing
  38. XLR
Manufacturer
  1. AEP
  2. Allied/Amphenol
  3. Amp Inc
  4. Amphenol
  5. Amphenol (182120-10)
  6. Amphenol (Old Version) NOS
  7. Amphenol / Connex
  8. Amphenol / RF
  9. Amphenol/Connex
  10. Amphenol/RF
  11. Andrew
  12. Andrew / Commscope
  13. Andrew/Commscope (Replaces L44R)
  14. Automatic Metal Products
  15. AVA Corp
  16. Bendix
  17. Bird Electronics
  18. Carter Craft
  19. Delta
  20. Delta Electronics, Inc
  21. Delta RF
  22. EF Johnson
  23. ERI
  24. ERI (Replaces Andrew 34660)
  25. ERI for Andrew
  26. HH Smith
  27. Huber Suhner
  28. ITT / SEALECTRO CORP.
  29. Johnson
  30. Kings
  31. Kings or TRU
  32. M/A-COM/ Omni Spectra
  33. Midwest
  34. Past
  35. Pomona
  36. Radiall
  37. RF Indistries
  38. RF Industries
  39. RF Industries, N/G/T
  40. RF Industriies
  41. RF Inuustries
  42. RFI
  43. RFIndustries
  44. RFS / Cablewave
  45. San-Tron
  46. STAR
  47. Star Connector
  48. TED
  49. Times
  50. Times Microwave
  51. Winchester
Product Categories
Hours Monday - Friday
7:00 - 3:30 PST

 Celebrating 50 years in business

RF Parts Company

435 S Pacific St
San Marcos, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)

1-760-744-0700, #1

Minimum Order
  • Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases: PayPal, VISA, MasterCard, American Express, Direct Deposit, and Wire Transfer.
  • All checks will be held for clearance. This process takes 5 - 7 business days.

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.