Connectors - RF Coaxial
We stock a full range of RF Connector types from the Industries best such as Amphenol, RF Industries, Times Microwave, CompPro, Andrew, etc. Please find the style Connector in the categories below and click on that category. Each Category may have various connector types so choose on the required style needed.
If you do not find what you require, please contact our sales office for more info.
NOTE: CONNECTORS ON WEBSITE ARE ORGINIZED BY CABLE GROUPS .
PLEASE CLICK ON LINK TO FIND YOUR CABLES' CABLE GROUP .
NEW COMPRESSION FIT CONNECTOR SERIES
NEW WATERPROOF CONNECTORS AND TOOLS
LMR® is a registered trademark of Times Microwave Systems.
RF Parts Company does build custom cable assemblies. If you require a custom cable built, contact our sales staff with your requirements.
-
NM-LCF12-D01 RFS Type-N Male OMNI FIT Premium Straight Connector for LCF12-50
$26.91 -
78EIANF-1 7/8" EIA to Type-N Female Adapter with Air Bypass (Pull)
$219.91 -
KH-59-08 Kings HN Male Connector for RG218 Cable (Pull)
$122.91 -
UG997A/U Dage Connectors Type-N 90 Degree Male to Female Panel Mount Connector (NOS)
$29.91 -
11N-50-8-11/133-UE Suhner 3/8" EFX Connector for EFX2-50 Antenna Cable (NOS)
$35.91 -
23187 Andrew 6" Line Section Male to Male Adapter 3-1/8” 50 Ohm (Pull)
$246.91 -
2262 Andrew 3-1/8" EIA to Type-N Female Between Series Adapter 50 Ohm (Pull)
$967.91 -
301-021 Myat Type Swivel Flanged 90 Degree Elbow 3-1/8" to 3-1/8" Adapter 50 Ohm (Pull)
$479.91 -
4610 Type Dielectric 3-1/8" Flanged 50 Ohm Dual Element Line Section (Pull)
$973.91 -
TN2 Trompeter Twinax TRB Fixed Paralleling-One Male to Two Jacks RF Adapter (NOS)
$228.91- All metallic parts are machined/formed to extremely close tolerances
- All bodies are made of top quality brass with bright nickel-plated nontarnish finish
- Fully enclosed, heat-treated, beryllium-copper outer conductor spring (not half hard slotted brass)
- Heat-treated, beryllium-copper center socket contact with 50 millionths inch gold plating
- All metallic parts are machined/formed to extremely close tolerances
- All bodies are made of top quality brass with bright nickelplated, non-tarnish finish
- Fully enclosed, heat-treated, beryllium-copper outer conductor spring (not half hard slotted brass) a patented feature
- Heat-treated, beryllium-copper center socket contact with 50 millionths inch gold plating
New Old Stock * No longer available for export
MFR: Trompeter
SKU: TN2Made in the USA