1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Not finding what you are searching for. Try a partial part number.

  • Home /
  • Connectors - RF Coaxial

Connectors - RF Coaxial

We stock a full range of RF Connector types from the Industries best such as Amphenol, RF Industries, Times Microwave, CompPro, Andrew, etc.  Please find the style Connector in the categories below and click on that category. Each Category may have various connector types so choose on the required style needed.    

If you do not find what you require, please contact our sales office for more info.

  NOTE: CONNECTORS ON WEBSITE ARE ORGINIZED BY CABLE GROUPS . 

PLEASE CLICK ON LINK TO FIND YOUR CABLES' CABLE GROUP . 

cablegroups

PL-259
(Male UHF)
PL-259 		SO-239
(Female UHF)
SO-239 		7/16 DIN
 
7/16 DIN 		BNC
 
BNC 		C Connectors
 
C Connector
EIA Flange
 
EIA Flange 		Type F
 
F Connectors 		  FME


FME 		  HN


HN 		LC


LC
MC Card


MC Card 		MCX & MMCX


MCX & MMCX 		MHV


MHV 		Type N


Type N Connectors 		QDS


QDS
QMA


QMA
RCA


RCA
Reverse Polarity


Rev Polarity
Reverse Thread


Rev Threads
SMA


SMA
 SMB & SSMB


SMB & SSMB 		TNC


TNC 		Mini-UHF


MINI-UHF 		UHF


UHF 		4.3-10


4.3-10 Connectors
UG Connectors
Military Grade

UG Connectors 		Twin Ax


TWIN AX 		1/4" Mono


1/4" Mono 		Weather Caps


Weather Caps 		Replacement
Crimp Ferrules

Ferrule
Microphone Connectors


Microphone Connectors 		Bird Line Sections


Bird Connector 		Binding Posts


Binding Post 		Strain Relief Boots


Strain Relief 		Weatherproofing


Coax Wrap

Connector Installation For your Cables

NEW COMPRESSION FIT CONNECTOR SERIES

CompPro® Series Connectors

TYPE-N COMPRESSION CONNECTOR 7/16 DIN MALE TYPE-N MALE RIGHT ANGLE
TNC MALE TNC RIGHT ANGLE

NEW WATERPROOF CONNECTORS AND TOOLS

STRIP TOOL CRIMP HANDLE
TORQUE WRENCE TOOL KIT

LMR® is a registered trademark of Times Microwave Systems.

RF Parts Company does build custom cable assemblies. If you require a custom cable built, contact our sales staff with your requirements.

List  Grid 

per page
Set Descending Direction
  1. VT500 RF Industries Compression Tool for CompPro Connectors

    VT500 RF Industries Compression Tool for CompPro Connectors

    $119.91

    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: VT500

  2. TQ-114-F18 RF Industries 1-1/4" (Hex Nut Size) 18 Ft-lbs Torque Wrench for DIN Connectors

    TQ-114-F18 RF Industries 1-1/4" (Hex Nut Size) 18 Ft-lbs Torque Wrench for DIN Connectors

    $152.91

    Torque Wrench for 7/16 DIN Male style 1/2" CompPro® compression connectors. 3/4" opening and 14 in/lbs of torque

    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: TQ-114-F18  

     

  3. TW10X14MM RF Industries 10 in/lbs Torque Wrench for CompPro TNC Male Connectors

    TW10X14MM RF Industries 10 in/lbs Torque Wrench for CompPro TNC Male Connectors

    $70.91

    For Cable Group I
    Cable Type: LMR400, CNT400
    10in/lb Torque for 14mm (9/16") 
    MFR: RF Industries
    SKU: TW10X14MM

  4. SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I

    SDT400-50 RF Industries Stripping Tool for CompPro Connectors and Cable Group I

    $69.91

    RF Industries cable stripper tool strips 50 Ohm coaxial cable for preparing CompPro® 400 size connectors. The coax stripper provides one-step preparation for drop cables. Cassette blades that require no adjustment removes the proper length of jacket to meet SCTE and Bellcore specifications.

    Ripley cable stripper is made of high-visibility red polymer that makes to difficult to lose this strip tool in your tool box. Replacement blade kit is also available: RC400-50

    Cable Types: LMR400, CNT400

    MFR: RF Industries
    SKU: SDT400-50

  5. IT50TA RF Industries Insertion Tool for CompPro Type-N to TNC Male Connectors

    IT50TA RF Industries Insertion Tool for CompPro Type-N to TNC Male Connectors

    $36.91

    100% machined Aluminium
    T-Insertion Tool 2-1/2" Overall length. 
    Used to install COMP-NM-400 and COMP-TM-400Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: IT50TA

     

  6. IT50NM RF Industries Insertion Tool for CompPro Type-N Male Connectors

    IT50NM RF Industries Insertion Tool for CompPro Type-N Male Connectors

    $30.91

    100% machined Aluminium
    T-Insertion Tool 2-1/2" Overall Length
    Used to install COMP-NM-400.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: IT50NM 

     

  7. COMP-TM-400 RF Industries Straight TNC Male Compression Connector

    COMP-TM-400 RF Industries Straight TNC Male Compression Connector

    $25.91 As low as: $21.10

    RF Industries Compression TNC male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50 
    Interface Type: N, Male
    Insulator: Ultem® 1000
    Gasket: Silicone Rubber
    MFR: RF Industries
    SKU: COMP-TM-400 

  8. COMP-NRA-400 RF Industries Type-N Male Right Angle Connector Assembly

    COMP-NRA-400 RF Industries Type-N Male Right Angle Connector Assembly

    $39.91 As low as: $34.66

    RF Industries Compression Type-N Right Angle male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50
    MFR: RF Industries
    SKU: COMP-NRA-400

  9. COMP-DM-400 RF Industries 7/16 DIN Male Connector Assembly

    COMP-DM-400 RF Industries 7/16 DIN Male Connector Assembly

    $33.91 As low as: $29.06

    Compression Type DIN male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.
    Cable Group: I
    Cable Types: LMR400, CNT400
    Freq:  DC-6 GHz
    Ohms: 50
    MFR: RF Industries
    SKU: COMP-DM-400

     

  10. TW-1412 RF Industries 19mm Hex Torque Wrench for CompPro Type-N Male Connectors

    TW-1412 RF Industries 19mm Hex Torque Wrench for CompPro Type-N Male Connectors

    $103.91

    Torque Wrench for N Male style 19mm CompPro® compression connectors. 14 in/lbs of torque.
    Cable Group: I
    Cable Types: LMR400, CNT400
    MFR: RF Industries
    SKU: TW-1412

Items 31 to 40 of 909 total

Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Shop By

Shopping Options

Category
  1. CompPro Series
  2. PL259 (SOLDER TYPE) * SEE UHF FOR CRIMP OR CLAMP TYPE *
  3. SO-239 Female UHF Connectors * SEE UHF FOR CRIMP OR CLAMP TYPE *
  4. 7/16 DIN
  5. BNC
  6. C Connectors
  7. EIA FLANGE
  8. Type F
  9. FME
  10. HN
  11. LC
  12. MC CARD
  13. MCX & MMCX
  14. MHV
  15. Microphone Connectors
  16. Type N
  17. QDS
  18. QMA
  19. RCA
  20. Reverse Polarity
  21. Reverse Thread
  22. SMA
  23. SMB & SSMB
  24. TNC
  25. Twin Ax
  26. Mini UHF
  27. 4.3-10
  28. UG Connectors (Military Grade)
  29. UHF
  30. Replacement Crimp Ferrules
  31. Binding Post Terminals
  32. Bird Line Section
  33. 1/4" Mono Phone Connector plug
  34. End / Weather Caps
  35. Strain Relief Boots
  36. INSTALLATION OF CONNNECTORS
  37. WeatherProofing
Manufacturer
  1. AEP
  2. Allied/Amphenol
  3. Amp Inc
  4. Amphenol
  5. Amphenol (182120-10)
  6. Amphenol (Old Version) NOS
  7. Amphenol / Connex
  8. Amphenol/Connex
  9. Amphenol/RF
  10. Andrew
  11. Andrew / Commscope
  12. Andrew/Commscope (Replaces L44R)
  13. Automatic Metal Products
  14. AVA Corp
  15. Carter Craft
  16. Delta
  17. Delta Electronics, Inc
  18. Delta RF
  19. EF Johnson
  20. ERI
  21. ERI (Replaces Andrew 34660)
  22. ERI for Andrew
  23. HH Smith
  24. Huber Suhner
  25. ITT / SEALECTRO CORP.
  26. Kings
  27. Kings or TRU
  28. M/A-COM/ Omni Spectra
  29. Midwest
  30. PAS
  31. Past
  32. Pomona
  33. Radiall
  34. RF Indistries
  35. RF Industries
  36. RF Industries, N/G/T
  37. RF Industriies
  38. RF Inuustries
  39. RFI
  40. RFIndustries
  41. RFS / Cablewave
  42. RFS/Cablewave
  43. San-Tron
  44. STAR
  45. Star Connector
  46. TED
  47. Times
  48. Times Microwave
  49. TRU
  50. Winchester
Product Categories
Hours of Operation: Monday - Friday 7:30 - 4:00 PST
  • Minimum Order:  Fifteen ($15.00), all inclusive.
  • Preferred Payments for Domestic and International Purchases:  PayPal, VISA, Master Card, American Express, Direct Deposit and Wire Transfer.
  • All checks will be held for clearance.  This process takes 5 - 7 business days.

RF Parts Company
435 S PACIFIC ST
SAN MARCOS, CA, 92078, USA

1-800-RFPARTS (1-800-737-2787)  1-760-744-0700, #1

Buy with confidence



© 1998-2020 RF Parts Company. All Rights Reserved.