Dummy Loads
Please click on a subcategory.
-
8897 Bird 2500 Watt Oil-Cooled RF Termination with BA-88 Series Blower (Pull)
$3,724.90 -
8860 Series Bird 1.5 kW Oil-Cooled Termaline Coaxial Resistor with LC Female Connector (Pull)
$1,622.90Power Rating 1500 W continuous
Impedance: 50 Ohms
Frequency Range and VSWR DC - 1 GHz @ 1.1 max.
1.065 max., 470-860 MHz for "D" Models
Temperture Range -40 to +45 °C
Coolant 1.5 gal. (5.68 liters) Silicone Oil
Operating Position Horizontal Only
Connectors: LC Female
Finish Gray Powder Coat
Dimensions 18-5/8" x 7-1/2" x 13-1/8" (L x W x H)
473 x 184 x 333 mm
Weight 31 lbs. (14.1 kg)Used, like new condition * No longer avialable for export
MFR: Bird Electronic Corporation
SKU: BIRD8860-LC-PNOTE: Picture for reference only. Condition may vary.
Made in the USA -
RFLOAD-DF200 RF Industries 7/16 Din Female 200 Watt Termination Load - 600-2700MHz
$763.90- Impedance: 50 Ohm
- 3rd Order IM: -155dBc (Relative to Carrier)
- 3rd Order IM Test Method: 2x43dBm Carriers
- VSWR: ≤ 1.25
- Power: 200W
MFR: RF Inudustries
SKU: RFLOAD-DF200See Data Sheet
-
-
DL300 Bird Electronics Dummy Load made for Celwave 300 Watts 50 Ohm (Pull)
$225.91We removed these beautiful 50 Ohm loads from a new 900 MHz Celwave® combiner assemblies. VSWR measures less than 1.05 @ 1.3 GHz and is rated 300W continuous.
Bottom of heatsink is tapped with mounting screws.
Type-N Female, Black Anodized
Size: 9.25" Long x 6.75" Wide x 5" HighUsed * No longer available for export
MFR: Bird Electronics for Celwave.
SKU: DL300View Typical VSWR Plot View Smith Chart
-
1439-3 Weinschel 150 Watt Dummy Load Type-N Female DC-2.4 GHz (Pull)
$221.91 -
ERI-003-F Bird 150 Watt Dummy Load (Pull)
$221.91 -
TN020F-100W Aeroflex/Inmet Dummy Load Type-N Female DC-2.5 GHz 100watt (Pull)
$214.91 -
25T-MN Bird Type-N Male Dummy Load 25 Watt
$149.91 -
RFLOAD-NM50 RF Industries Type-N Male 50 Watt Termination Load - DC-3 GHz
$149.91 As low as: $116.91