Grounding & Lightning Protection

Use with 294561 Clamp

Adapters are 1.13 to 4.5 Inch in Diameter

MFR: Andrew
SKU: 31670-3

Use with 249561 Clamp

• Compatible Diameter, maximum 76.2 mm   |   3 in
• Compatible Diameter, minimum 50.8 mm   |   2 in
• Material Thickness 0.711 mm   |   0.028 in
• Material Type Stainless steel

MFR: CommScope
SKU: 31670-2

This grounding kit will work on all cables from 1/4" to 5/8" cable.  Will work on the following cables:

ANDREW: CNT240, CNT400, CNT600
TIMES MICROWAVE: LMR-195, LMR240, LMR400, LMR600
BELDEN:  RG58, RG142, RG8X, RG213, RG393, RG400, RG217, ETC.

MFR: Andrew/Commscope
SKU: GK-SUNV

• Surge arrestor accessory 
• Interface: N Female Bulkhead

MFR: CommScope
SKU: 243951-COM

Data Sheet

GKC58  Clip on Ground Kit for 5/8" Cables - 5' Lead W/ Unattached 3/8" Two Hole Lug

MFR: Eupen
SKU: GKC58

• 3/4" wide x 34" long w/lugs on either end
• Lug hole: 3/8" diameter
• Tinned copper Lugs

MFR: Unicor
SKU: 75180-10

Use with 294561 Clamp

• Compatible Diameter, maximum 50.8 mm   |   2 in
• Compatible Diameter, minimum 25.4 mm   |   1 in
• Material Thickness 0.711 mm   |   0.028 in
• Material Type Stainless steel

MFR: CommScope
SKU: 31670-1

GKS78 Ground Kit for 7/8" Cables - 5' Lead W/ Unattached 3/8" Two Hole Lug
MFR: Eupen
SKU: GKS78

DSXL-ME In Line EMP Surge Filter, 700-2.7 GHz, Type-N Male/Female Bulkhead
No Hardware included
Used clean * No longer available for export
MFR: Polyphaser
SKU: DSXL-ME-P

NOTE: PICTURE FOR REFERENCE ONLY.  CONDITION MAY VARY.