Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Catagory choices:
| ATLAS RADIO | ||
| TEXAS STAR | ||
| SWAN | KLM | YAESU |
| DRAKE |
|
ALLIGATOR CLIP LEADS |
| RADIO TOOLS | METER SHUNTS | |
| TERMINAL BLOCKS |
|
|
-
16-010-010A Vintage Open Frame Relay 3PDT 110vdc 5a (NOS)
$19.91 -
RFC3 Plate Choke 225uh 1.5 amp 4kv 1.8-30 MHz
$69.90 -
-
-
-
RWR84SR100FR Vishay Wirewound Resistor 0.1 ohm 7w (NOS)
$2.91 -
RWR84S1000FR Vishay Wirewound Resistor 100 ohm 7w (NOS)
$3.91 -
ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
$299.91ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102Made in the USA -
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D
Regular Price: $199.95
Special Price $179.95
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim
This transformer was removed from a working Henry 3000D RF Power Generator amplifier. In excellent condtion - Like New.
Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs
Made in USA, Limited Quantity Available, Not Available for Export
Made in the USA -
Henry 3000D Radio Frequency Power Generators from Henry Electronics
$2,789.90HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA
