Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Catagory choices:
| ATLAS RADIO | ||
| TEXAS STAR | ||
| SWAN | KLM | YAESU |
| DRAKE |
|
ALLIGATOR CLIP LEADS |
| RADIO TOOLS | METER SHUNTS | |
| TERMINAL BLOCKS |
|
|
-
SF6B Cabinet Feet w/Steel Support, Black (Pack of 12) Budwig
$14.91 -
CM15-200 Sangamo Molded Mica Capacitor 200pf 500 volts 5% Axial Lead (NOS)
$1.91 As low as: $1.63 -
RFC3 Plate Choke 225uh 1.5 amp 4kv 1.8-30 MHz
$34.91 -
-
-
-
-
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D
Regular Price: $199.95
Special Price $179.95
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim
This transformer was removed from a working Henry 3000D RF Power Generator amplifier. In excellent condtion - Like New.
Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs
Made in USA, Limited Quantity Available, Not Available for Export
Made in the USA -
3CX3000A7 RF Parts High-Mu Power Triode (Rebuilt)
$2,001.91- Rebuit with an Eimac core
- Filament: Thoriated Tungsten
- Voltage: 7.5 Volts
- Current @ 7.5 Volts: 51.5 Amps
Rebuilt * No longer available for export
MFR: RF Parts Company
SKU: 3CX3000A7-RFPRThis rebuilt tube has been recently tested and meets all technical specifications. The Warranty period for this tube is Ninety Days from the date of purchase, for the original customer only. Please follow the instruction insert for proper installation.
Made in the USA -
HENRY 3000D Radio Frequency Power Generators from Henry Electronics
$3,990.95HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition. Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA
