Radio & Amplifier Service Parts
Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Catagory choices:
| ATLAS RADIO | ||
| TEXAS STAR | ||
| SWAN | KLM | YAESU |
| DRAKE |
|
ALLIGATOR CLIP LEADS |
| RADIO TOOLS | METER SHUNTS | |
| TERMINAL BLOCKS |
|
|
-
122-275-001S Johnson 5 Pin Heavy Duty Commercial Grade Tube Socket - Silver Plated Contacts (Pull)
$49.91 -
11 Pin Cinch Connectivity Solutions Octal Male Accessory Plug (NOS)
$17.9111 Pin Cinch Connectivity Solutions Octal Male Accessory Plug
Commonly used in Older Ham Radios, Heathkit, National, Kenwood, Yaesu, Ameritron, etc. Relay connector for Kenwood TL922, Yaesu FL2100Z and Heathkit SB-101, HW-101 and Collins S-Line.
New Old Stock * Not available for ExportMade in the USA -
431-13 HH Smith Original Heathkit 4 Screw Terminal Strip For SB200 SB220 and SB221 (NOS)
$12.91 -
-
-
-
-
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D
Regular Price: $199.95
Special Price $179.95
ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim
This transformer was removed from a working Henry 3000D RF Power Generator amplifier. In excellent condtion - Like New.
Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs
Made in USA, Limited Quantity Available, Not Available for Export
Made in the USA -
ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
$299.91ECA1102 Filament Transformer 200-240vac Primary, 7.5vac 52A pulled from a Henry 3000D Amplifier
This transformer was removed from a working Henry 3000D Amplifier from the Henry Radio Industrial Division.
Size: 4-3/8" Long x 5 1/4" High x 4" wide, Weight: 13.85 lbs
Excellent condtion * No longer available for export
SKU: ECA1102Made in the USA -
HENRY 3000D Radio Frequency Power Generators from Henry Electronics
$3,990.95HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition. Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA
