Radio & Amplifier Service Parts

Removed from working equipment. Has original circuitry attached as well as two large cable leads coming from the base of the circuit.
The socket has one tooth missing from the top ring.
Used
MFR: Eimac
SKU: SK300A-PWC
NOTE: Picture is the part you will be receiving.

This is the collet that fits on the outside of 001837 & 001838 Collects on SK300A Eimac tube socket. Size: 3.8" Inside Diameter
Comes with the spring ring. Missing two teeth on the ring. 
Used
MFR: Eimac
SKU: 001839-P

This is the collet that fits in middle of 001837 & 001839
Size: 2.8" Inside Diameter
Used
MFR: Eimac
SKU: 001838-P

Designed to function as a conductive bracket for the bottom of the SK-300A 
Used * No longer available for export
MFR: Eimac
SKU: MCMR

Designed to function as a conductive bracket for the bottom of the SK-300A 
Used * No longer available for export
MFR: Eimac
SKU: ICMR

Designed to function as a mounting bracket for the base of the SK300. Generally used to fasten a cable to the base of the socket to run power through.
Used * No longer available for export
MFR: Eimac
SKU: RAMB

Designed to function with 4CX5000A, 4CX5,000R, 4CX5,000J 
Used
MFR: Eimac
SKU: SK300-P

Designed to function with 4CX5000A, 4CX5,000R, 4CX5,000J 4CW10,000A 4CW10,000B 4CW10,000R, 4CW25,000A, 4CW25,000B, 4CPW10,000, and 4CW30,000A tubes.
Same as Y-291 except for bracket placement.
New Old Stock
MFR: Eimac
SKU: SK300

• Similar to the SK700 Socket.
• Gold Plated
• Screen Bypass 1.06 nF ± 10%

New Old Stock * New In Box * No longer available for export
MFR: Eimac
SKU: Y430