1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Radio & Amplifier Service Parts

Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Catagory choices:

ATLAS RADIO

HEATHKIT

PRIDE

MESSENGER

PALOMAR

TEXAS STAR
 SWAN  KLM YAESU
DRAKE

 

 ALLIGATOR CLIP LEADS
 RADIO TOOLS  METER SHUNTS

 RADIO FOOT SWITCH

TERMINAL BLOCKS

TERMINAL BOARDS

 

MISCELLANOUS

 

 

 

 

 

 

 

List  Grid 

per page
Set Descending Direction
  1. CM15-200 Sangamo Molded Mica Capacitor 200pf 500 volts 5% Axial Lead (NOS)

    CM15-200 Sangamo Molded Mica Capacitor 200pf 500 volts 5% Axial Lead (NOS)

    CM15-200 Sangamo Molded Mica Capacitor 200pf 500 volts 5% Axial Lead (NOS)

    New Old Stock * No longer available for export
    MFR #: CM15ED201J
    MFR: Sangamo
    Similar to Heathkit Part number: 20-3

  2. RFC3 Plate Choke 225uh 1.5 amp 4kv 1.8-30 MHz

    RFC3 Plate Choke 225uh 1.5 amp 4kv 1.8-30 MHz

    $89.90

    Our best plate choke for 1.8-30 MHz Amateur Bands including WARC.  Ideal for amplifiers using 811A, 572B, 813, 833, 3-500Z, 8877, 3CX800A7, 4CX1500B, etc.

    Size: 5-5/8" Long x 1" Diameter  Ceramic Form.

    MFR: Ameritron
    SKU: 10-15197

    Note: For best results, solder the red wire to the terminals


  3. SF6B  Cabinet Feet w/Steel Support, Black (Pack of 4) Budwig

    SF6B Cabinet Feet w/Steel Support, Black (Pack of 4) Budwig

    $4.91

    SF6B  Cabinet Feet w/Steel Support, Black (Pack of 4), MFR: Budwig

    Cabinet feet for Collins, Heathkit, etc. Thermoplastic Rubber feet with steel support bushing.  Use #6 sheet metal or machine screw - 3/8" long

    Made in the USA

  4. SF6B  Cabinet Feet w/Steel Support, Black (Pack of 12) Budwig

    SF6B Cabinet Feet w/Steel Support, Black (Pack of 12) Budwig

    $14.91

    SF6B  Cabinet Feet w/Steel Support, Black (Pack of 12), MFR: Budwig Manufacturing Company

    Cabinet feet for Collins, Heathkit, etc. Thermoplastic Rubber feet with steel support bushing.  Use #6 sheet metal or machine screw - 3/8" long 

    Made in the USA
  5. 303D10 CDE 3PDT Open Frame Relay 110vdc 10 amp 10k ohm (NOS)

    303D10 CDE 3PDT Open Frame Relay 110vdc 10 amp 10k ohm (NOS)

    $21.91

    Size: 1.9" Long x 1.1" Wide x 1.3" High

    Possible replacement for the Heathkit SB220-221 

    New Old Stock * No longer available for export
    MFR: Cornell Dubilier Electronics
    SKU: 303D10

  6. 3PDT10A110V Open Frame Relay 3PDT 10 amp 110 vdc Coil

    3PDT10A110V Open Frame Relay 3PDT 10 amp 110 vdc Coil

    $32.91

    • Size: 1.75" Long x 1" Wide x 1.2" High
    • Can be used as a replacement in the Heathkit SB220-SB221 Linear Amplifiers

    Made in Japan
    SKU: 3PDT10A110V

  7. KRUP110  KEST Enclosed Relay, 3PDT 120vac 13a,  (NOS)

    KRUP110 KEST Enclosed Relay, 3PDT 120vac 13a, (NOS)

    $19.91

    Possible replacement for Heathkit SB220, SB221

    New Old Stock
    MFR: KEST
    SKU: KRUP110

  8. KA11DG-110V  Potter Brumfield Open Frame Relay, DPDT, 110v 10amp (NOS)

    KA11DG-110V Potter Brumfield Open Frame Relay, DPDT, 110v 10amp (NOS)

    $49.91

    Coil Resistance: 10kohm
    Contact Voltage AC Nom: 240 V
    External Width: 37.29 mm
    Nom Operating Power: 1.2 W
    Coil Current: 11.5 mA
    External Height: 34.93 mm
    Contact Current Max:10 
    External Depth: 48.8 mm
    Coil Voltage VDC Nom: 110 V

    Can be used as a replacement in the Heathkit SB200-SB201 Linear Amplifiers

    New Old Stock * No longer available for export
    MFR: Potter & Brumfield

     


  9. Henry 3000D Radio Frequency Power Generators from Henry Electronics

    Henry 3000D Radio Frequency Power Generators from Henry Electronics

    $2,789.90

    HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz

    We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years.  They were removed from service at "Applied Materials".   The Henrys as a whole and the parts therein, are in good condition.

    • Eimac 3CX3000A7 tube. 
    • Full Bird Dual Slug Wattmeter setup with forward and reflected power. 
    • Three Phase 208/240 V input.
    • Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
    • Power requirement: 40 Amps

    Please send an email to customerservice@rfparts for any questions that you may have.

    Weight 600 lbs.  (Local Pickup or Truck Freight)

    FOB San Marcos, CA 

    MFR: Henry Radio Electronics, California

    Not available for export   Limited Warranty

    Made in the USA

  10. ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D

    ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va Removed from Henry 3000D

    Regular Price: $194.90

    Special Price $179.95

    ECA1082 Step Down Transformer, 240vac Primary, 120vac Secondary, 500va MFR: ECA - Anaheim

    This transformer was removed from a working Henry 3000D RF Power Generator amplifier.  In excellent condtion - Like New.

    Size: 4-3/8" Long x 5-3/8" High x 5" wide, Weight: 17.45 lbs

    Made in USA, Limited Quantity Available, Not Available for Export

    Made in the USA

Items 91 to 100 of 346 total

Page:
  1. 8
  2. 9
  3. 10
  4. 11
  5. 12