1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

Radio & Amplifier Service Parts

Please choose from the following RADIO & AMPLIFIER SERVICE PARTS Sub-Catagory choices:

ATLAS RADIO

HEATHKIT

PRIDE

MESSENGER

PALOMAR

TEXAS STAR
 SWAN  KLM YAESU
DRAKE

 

 ALLIGATOR CLIP LEADS
 RADIO TOOLS  METER SHUNTS

 RADIO FOOT SWITCH

TERMINAL BLOCKS

TERMINAL BOARDS

 

MISCELLANOUS

 

 

 

 

 

 

 

List  Grid 

per page
Set Descending Direction
  1. CL2L2 Comair Rotron Caravel Axial Fan 1650 RPM 560CFM 1.0-0.88 Amps 36 Watts 115 VAC 60/50 Hz (Pull)

    CL2L2 Comair Rotron Caravel Axial Fan 1650 RPM 560CFM 1.0-0.88 Amps 36 Watts 115 VAC 60/50 Hz (Pull)

    $89.91

    Axial Fan removed from Henry Electronics 3000D RF Power Generator Amplifier. This Fan is in Like New condition. Screen included.
    Used * No longer available for export
    MRF: Comair Rotron * Assembled in Mexico
    SKU: CL2L2


  2. HENRY-METERPANEL  3000D Henry Electronics Meter Panel

    HENRY-METERPANEL 3000D Henry Electronics Meter Panel

    $225.00

    HENRY-METERPANEL  3000D Henry Electronics Meter Panel from a 3000D Power Generator.

    Made in the USA

  3.  3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator

    3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator

    $1,095.00

    3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator

    RF Deck removed from Henry Electronics RF Power Generator 3000D.  The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.

    The deck consists of the following items:

    • Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
    • Tube socket and chimney for 3CX3000A7 tube (Tube not included)  See 3CX3000A7
    • Plate choke assembly
    • Line Section w/ elements
    • See HENRY "2000 WATT SECTION" diagram below:

    Henry Electronics RF Deck - Top

     

     MFR: Henry Electronics, USA

    Limtied Quantity Available Not for Export

    Made in the USA

  4. Henry Electronics Driver Amplifier & Power Supply for 3000D Generator 9600-0200 (Pull)

    Henry Electronics Driver Amplifier & Power Supply for 3000D Generator 9600-0200 (Pull)

    $395.91

    • Uses two MRF422 150 Watt Transistors

    Clean Pull * No longer available for export
    MFR: Henry Electronics
    SKU: 9600-0200-P

     

    Made in the USA

  5. 4C446 Dayton Blower Fan 115v 50/60 Hz 3160 RPM (NOS)

    4C446 Dayton Blower Fan 115v 50/60 Hz 3160 RPM (NOS)

    $149.91

    Dynamically balanced, the Dayton 4C446 Blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures.

    • Speed 3160 RPM
    • CFM @ 0.000-In SP: 148
    • Voltage 115 Volts AC

    New Old Stock * No longer available for export
    MFR: Dayton
    SKU: 4C446

    Made in the USA

  6. Instruction Manuals Henry Electronics Power Generators (Reprint)

    Instruction Manuals Henry Electronics Power Generators (Reprint)

    $29.91

    Instruction Manuals for Henry Electronics Power Generators (Reprint)

    Includes 2 manuals that are for the following Henry Electronics models:  500D, 1000D, 1500D, 2000D, 2500D, 3000D, and 5000D

    Include:

    • Specifications
    • operation
    • schematics
    • diagrams
    • Parts list

    SKU: SM1000D

    Made in the USA

  7. POWER CORD, Removed from  Henry 3000D Amplifier 8/4-220  31 FOOT 8/4 Wire with Hubbell 231A connectors

    POWER CORD, Removed from Henry 3000D Amplifier 8/4-220 31 FOOT 8/4 Wire with Hubbell 231A connectors

    $89.95

    POWERCORD-8/4-220  31 FOOT 8/4 Wire with Hubbell 231A connector, (Removed from Henry 3000D) No longer available for Export

    31-1/2 feet of Royal Electric 8/4 Wire SO 90°C (4 conductor - 8 gauge) with Hubbell 4 pin connector (220v) 30amp 250v 30 installed and Thomas and Betts Chassis connector.  Removed from Henry 3000D RF Power Generator Amplifier.  Like new condition. 

    Made in the USA

  8. PO7D5004Y21 Aerovox Oil-filled Capacitor 4uf 5000vdc (Pull)

    PO7D5004Y21 Aerovox Oil-filled Capacitor 4uf 5000vdc (Pull)

    $179.91

    This capacitor was removed from Original Henry 3000D amplifier and is in NOS condition.  Henry part number C703. Completely checked and meets all factory specs. No PCB.

    Size: 4 5/8" long x 3 3/4" wide x 7 1/2" high
    Used * No longer available for export
    MFR: Aerovox
    SKU: PO7D5004Y21

    Made in the USA

  9. ECA5027 HV Swinging Choke Transformer, 15-8 Henry, 1.5A Removed from Henry 3000D

    ECA5027 HV Swinging Choke Transformer, 15-8 Henry, 1.5A Removed from Henry 3000D

    $269.95

    ECA5024 Swinging Choke Transformer, 15-8 Henry, 1.5A Continuous (Removed from Henry 3000D), MFR: ECA

    This High Voltage Choke Transformer was removed from a working Henry 3000D RF Power Generator Amplifier. 

    It is in like-new, excellent condtion

    Size: 5.5" Long x 6-1/2" High x 8" wide, Weight: 46 lbs

    Limited Quantity Available  No longer available for Export

    Made in the USA
  10. 3PDT10A110V Open Frame Relay 3PDT 10 amp 110 vdc Coil

    3PDT10A110V Open Frame Relay 3PDT 10 amp 110 vdc Coil

    $32.91

    • Size: 1.75" Long x 1" Wide x 1.2" High
    • Can be used as a replacement in the Heathkit SB220-SB221 Linear Amplifiers

    Made in Japan
    SKU: 3PDT10A110V

Items 71 to 80 of 222 total

Page:
  1. 6
  2. 7
  3. 8
  4. 9
  5. 10