Heathkit Repair Parts

Replacement for Heathkit SB220/SB221. Heath part number: 26-145 spacing 0.03".  Loading Capacitor 

• Plates: 53
• Spacing: 0.030"
• Volts: 1500 Peak
• Size: 5.7" Long x 2.665" wide x 2.6" High
• Shaft: 1/4" Round

MFR: OEP
SKU: 73-1-32-53

Replacement for Heathkit SB220/SB221. Heath part number: 26-131 spacing 0.08".  Tuning Capacitor

• Plates: 35, Spacing: 0.080"
• Volts: 3600 Peak
• Size: 6.2" Long x 2.665" wide x 2.6" High
• Shaft: 1/4" Round

MFR: OEP
SKU: 73-1-80-35

Our best plate choke for 1.8-30 MHz Amateur Bands including WARC.  Ideal for amplifiers using 811A, 572B, 813, 833, 3-500Z, 8877, 3CX800A7, 4CX1500B, etc.

Size: 5-5/8" Long x 1" Diameter  Ceramic Form.

MFR: Ameritron
SKU: 10-15197

Note: For best results, solder the red wire to the terminals

Coil Resistance: 10kohm
Contact Voltage AC Nom: 240 V
External Width: 37.29 mm
Nom Operating Power: 1.2 W
Coil Current: 11.5 mA
External Height: 34.93 mm
Contact Current Max:10 A 
External Depth: 48.8 mm
Coil Voltage VDC Nom: 110 V

Can be used as a replacement in the Heathkit SB200-SB201 Linear Amplifiers

New Old Stock * No longer available for export
MFR: Potter & Brumfield

• Tolerance:  20%
• Size: The cap is 0.725 diameter and 0.835 from threaded end to threaded end.
• Heavy Duty replacement for 21-165 used in Heathkit SB220 and SB221

MFR: High Energy
SKU: 581000-7

• Size: 1.75" Long x 1" Wide x 1.2" High
• Can be used as a replacement in the Heathkit SB220-SB221 Linear Amplifiers

Made in Japan
SKU: 3PDT10A110V

1N3996A - Zener Diode, 10w 5.1v MFR: NJS

Used in Heathkit SB220 and SB221

Size: 1.9" Long x 1.1" Wide x 1.3" High

Possible replacement for the Heathkit SB220-221 

New Old Stock * No longer available for export
MFR: Cornell Dubilier Electronics
SKU: 303D10