Vacuum Relays

Kilovac SPDT High Voltage Vacuum Relay 26.5vdc 120 Ohm (Pull)

Used - No longer available for export
MFR: HIgh Vacuum Electronics INc.
SKU: KILO-120-26.5-P

RD3 Jennings Vacuum Relay 26.5VDC (Pull)

Used
MFR: Jennings Radio
SKU: RD3-P

• Insulator KV peak test 80KV
• Switch KV Peak Test 50KV Peak 

Used
MFR Jennings
SKU: RP103F4304D23B20-P

• Voltage rating 15.5KV
• Current Rating 200Amps

Used
MFR Jennings
SKU: RP101F4903D21B20-P

Switch Type R5C
Peak Test Voltage 25KV

New Old Stock
MFR: Jennings

SKU: 

Peak Voltage: 50Kv
Max Amperage: 50 Amp
InsulPK test Voltage 20 KV
Solenoid Voltage 115VAC

New Old Stock
MFR: Jennings
SKU: R14063A31000

Voltage Rating 30kv DC
Current Rating: 100amps DC
Actuator Volts: 115v 50/60 Hz

Used
MFR: Jennings
SKU: RT1G42020C21A10-P

• Test Voltage: 9 kV
• Peak Voltage: 7 kV
• Current Carry Amps (RMS): 12 amps

MFR: Jennings Radio
SKU: RF43-26N909

The H-17 SPDT Vacuum Relay will isolate 12 kV at 32 MHz. The Tungsten contacts are suitable for power switching low current loads.
Meets requirements of MIL-R-83725.

Coil Data
Nominal Volts DC: 12 Vdc 26.5 Vdc 115 Vdc
Pickup, Maximum: 8 Vdc 16 Vdc 80 Vdc
Dropout: .5-5 Vdc 1-10 Vdc 5-50 Vdc
Coil Resistance (±10%) 120 Ω

Used * Clean Condition * No longer available for export
MRF: Kilovac Made in USA
SKU: H-17