VINTAGE
Vintage: RF Parts Company has more than 20,000 sq. ft. of VINTAGE Communications Equipment and Electronic Parts. Due to the enormous volume of our inventory, much of it is not listed on our www.rfparts.com website (we have been uploading our inventory as time allows, since 1992. Please send an email to rfp@rfparts.com or call 1-800-RFPARTS (1-800-737-2787) to check availability and pricing.
-
243684 Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk
$74.91Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
MFR: Commscope / Andrew
SKU: 243684
Note: Use the following hardware
243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
L4CLICK Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs) -
L4A-PNMDM-12 Andrew Pre-Made Cable Assembly 12ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Connector
$79.91 -
734864 RFS/Cablewave Type-N Male Connector for S-FLC12-50 1/2" Flexwell (FLexible) Cable (NOS)
$22.91 -
-
-
Henry 3000D Radio Frequency Power Generators from Henry Electronics
$2,789.90HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA -
EC4-NMNM-75 Pre-Made Assembly, 75 ft EC4-50 w/Type-N Male Connectors
$229.91 -
L4A-PDMDM-3 Andrew Pre-Made Cable assembly 3 FOOT LDF4-50A W/ 7/16 DIN Male Connectors Installed
$54.91 -
F4A-PDMDM-6-USA Andrew/CAXT Pre-Made Cable Assembly, 6 ft FSJ4-50B W/7/16 DIN Male Connectors
$89.95 -
