1-800-RFPARTS (1-800-737-2787) 1-760-744-0700 (USA) ORDERS: rfp@rfparts.com 435 S PACIFIC ST SAN MARCOS, CA 92078

VINTAGE

Vintage:  RF Parts Company has more than 20,000 sq. ft. of VINTAGE Communications Equipment and Electronic Parts.  Due to the enormous volume of our inventory, much of it is not listed on our www.rfparts.com website (we have been uploading our inventory as time allows, since 1992.  Please send an email to rfp@rfparts.com or call 1-800-RFPARTS (1-800-737-2787) to check availability and pricing.

List  Grid 

per page
Set Descending Direction
  1. 10' LMR®400 Cable Assembly with RFN1006-I Type-N Male Connectors

    10' LMR®400 Cable Assembly with RFN1006-I Type-N Male Connectors

    $56.91

    10 foot Pre-Made cable assembly with LMR®400 and Type-N Male Connectors Installed

    SKU: L400NMNM-10

    LMR® is a registered trademark of Times Microwave Systems.

  2. 243684  Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk

    243684 Andrew Compact Stainless Steel Angle Adapter with 3/8" Tapped Hole (Clamp Only) 10pk

    $74.91

    Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps. 10 pieces per pack
    MFR: Commscope / Andrew
    SKU: 243684
    Note: Use the following hardware
    243095-9 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 1 Hanger Clamp (Rod is 3.75")
    243095-5 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 2 Hanger Clamps (Rod is 5.5")
    243095-1 Stainless Steel Hardware Kit for 1/2 in or 7/8 in Double Click-on Hangers, includes 3/8 in bolts and hardware, 3 Hanger Clamps (Rod is 7")
    L4CLICK  Double Click-on Hanger for 1/2 in coaxial cable, Hanger Clamp (2 cable runs)
    L5CLICKB Double Click-on Hanger for 7/8 in coaxial cable, Hanger Clamp (2 cable runs)

  3. R19-001 Rocker Switch, SPST, 6a 250vac, Red Illuminated

    R19-001 Rocker Switch, SPST, 6a 250vac, Red Illuminated

    R19-001 Rocker Switch, SPST, 10a 125vac 5a 250vac, Red Illuminated, MFR: Light Country

  4. L4A-PNMDM-3 Andrew Pre-Made Cable Assembly, 3 ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Connectors

    L4A-PNMDM-3 Andrew Pre-Made Cable Assembly, 3 ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Connectors

    $69.95

    L4A-PNMDM-3  Pre-Made Cable Assembly, 3 ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Installed on either side, MFR: Andrew

     

  5. L4A-PNMDM-12  Andrew Pre-Made Cable Assembly 12ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Connector

    L4A-PNMDM-12 Andrew Pre-Made Cable Assembly 12ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Connector

    $79.91

    L4A-PNMDM-12  Pre-Made Cable Assembly, 12 ft LDF4-50A w/Type-N Male Connector & 7/16 DIN Male Connector

    MFR: Andrew
    SKU: L4A-PNMDM-12

     

  6. RB7-9 Messenger 125 Pre-Amp Board with Relays installed (NOS)

    RB7-9 Messenger 125 Pre-Amp Board with Relays installed (NOS)

    $14.91

    Messenger 125 Pre-Amp Board with Relays installed.

    MFR: Messenger

    SKU: RB7-9 

     


  7. Henry 3000D Radio Frequency Power Generators from Henry Electronics

    Henry 3000D Radio Frequency Power Generators from Henry Electronics

    $2,789.90

    HENRY 3000D Radio Frequency Power Generators Rated at 3000 Watts Continuous Output on 13.56 MHz

    We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years.  They were removed from service at "Applied Materials".   The Henrys as a whole and the parts therein, are in good condition.

    • Eimac 3CX3000A7 tube. 
    • Full Bird Dual Slug Wattmeter setup with forward and reflected power. 
    • Three Phase 208/240 V input.
    • Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
    • Power requirement: 40 Amps

    Please send an email to customerservice@rfparts for any questions that you may have.

    Weight 600 lbs.  (Local Pickup or Truck Freight)

    FOB San Marcos, CA 

    MFR: Henry Radio Electronics, California

    Not available for export   Limited Warranty

    Made in the USA
  8. EC4-NMNM-75  Pre-Made Assembly, 75 ft EC4-50 w/Type-N Male Connectors

    EC4-NMNM-75 Pre-Made Assembly, 75 ft EC4-50 w/Type-N Male Connectors

    $229.91

    EC4-NMNM-75  Pre-Made Cable Assembly, 75 ft EC4-50 w/Type-N Male Connectors Installed on both sides, MFR: Eupen

  9. L4A-PDMDM-3 Andrew Pre-Made Cable assembly 3 FOOT LDF4-50A  W/ 7/16 DIN Male Connectors Installed

    L4A-PDMDM-3 Andrew Pre-Made Cable assembly 3 FOOT LDF4-50A W/ 7/16 DIN Male Connectors Installed

    $54.91

    L4A-PDMDM-3 Pre-Made Cable Assembly, 3 ft LDF4-50A W/7/16 DIN Male Connectors Installed on Both Ends

    MFR: Andrew 
    SKU: L4A-PDMDM-3

  10. F4A-PDMDM-6-USA Andrew/CAXT Pre-Made Cable Assembly, 6 ft FSJ4-50B W/7/16 DIN Male Connectors

    F4A-PDMDM-6-USA Andrew/CAXT Pre-Made Cable Assembly, 6 ft FSJ4-50B W/7/16 DIN Male Connectors

    $89.95

    F4A-PDMDM-6-USA  Pre-Made Cable Assembly, 6 ft FSJ4-50B W/7/16 DIN Male Connectors Installed on both sides, MFR: Andrew/CAXT

Items 511 to 520 of 644 total

Page:
  1. 50
  2. 51
  3. 52
  4. 53
  5. 54