VINTAGE
Vintage: RF Parts Company has more than 20,000 sq. ft. of VINTAGE Communications Equipment and Electronic Parts. Due to the enormous volume of our inventory, much of it is not listed on our www.rfparts.com website (we have been uploading our inventory as time allows, since 1992. Please send an email to rfp@rfparts.com or call 1-800-RFPARTS (1-800-737-2787) to check availability and pricing.
-
3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
$1,095.003000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
RF Deck removed from Henry Electronics RF Power Generator 3000D. The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.
The deck consists of the following items:
- Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
- Tube socket and chimney for 3CX3000A7 tube (Tube not included) See 3CX3000A7
- Plate choke assembly
- Line Section w/ elements
- See HENRY "2000 WATT SECTION" diagram below:
MFR: Henry Electronics, USA
Limtied Quantity Available Not for Export
Made in the USA -
FM0B Mounting Flange for Vacuum Relays/Capacitors (Pull)
$44.91 -
AMB-1 Aluminum Mounting Block for Vacuum Capacitors (Pull)
$39.91 -
FM3C Mounting Flange for Vacuum Capacitors (Pull)
$51.91 -
220498 1-5/8" EW52/EW63 Ground Kit 2-Hole 3/8" Lug 5' Field Crimp, Andrew
$39.95 -
8072 Eimac Transmitting Tube (Pull)
$89.91 -
0003-05 Compression Mica Trimmer Capacitor 14-118 pF PC Mount (NOS)
$17.910003-05 Trimmer Capacitor, Compression Mica, 14-118 pF, PC Mount, 5/32 tuning nut (Similar to 406)
This capacitor style is supplied with a staple which is used for mounting the trimmer on a 5/16" width bracket. The mounting tabs on each side have narrowed ends for easy PC mounting. Has 5/32 tuning nut on top for adjusting. (Hi-pot tested at 500v)
New Old Stock * No longer available for export
SKU: 0003-05
Made in the USA -
UCSXF-2000-7.5 Jennings Vacuum Variable Capacitor, 50-2000pf, 7.5kv Peak (Pull)
$795.00 -
STR-4B32 SSDI Solid State HV Rectifier Diode (Pull)
$60.00Replacement for 4B32 vacuum tube. Uses the PLCAP1 plate cap.
Size: 7" Long x 1.85" DiameterRemoved from working equipment
Clean Pullout * No longer available for export
MFR: SSDI (FAA version), Made in USA
SKU: STR4B32-PMade in the USA -
085-B37-A1C-4A2 Narda SP8T SMA Female RF Coax Switch 24vdc DC-18 GHz (Pull)
$829.91