VINTAGE
Vintage: RF Parts Company has more than 20,000 sq. ft. of VINTAGE Communications Equipment and Electronic Parts. Due to the enormous volume of our inventory, much of it is not listed on our www.rfparts.com website (we have been uploading our inventory as time allows, since 1992. Please send an email to rfp@rfparts.com or call 1-800-RFPARTS (1-800-737-2787) to check availability and pricing.
-
L225J5R0 Ohmite Wirewound Resistor 5 Ohm 225 Watt (NOS)
$26.91 -
S304CCT-2W 4 Pin Cinch Connector Socket (Jones) Pre-wired (NOS)
$21.91 -
BE20412 Transformer, 24vac, 65VA, Primary 220vac, Basler
$14.95 -
-
ECA5027 HV Swinging Choke Transformer, 15-8 Henry, 1.5A Removed from Henry 3000D
$269.95ECA5024 Swinging Choke Transformer, 15-8 Henry, 1.5A Continuous (Removed from Henry 3000D), MFR: ECA
This High Voltage Choke Transformer was removed from a working Henry 3000D RF Power Generator Amplifier.
It is in like-new, excellent condtion
Size: 5.5" Long x 6-1/2" High x 8" wide, Weight: 46 lbs
Limited Quantity Available No longer available for Export
Made in the USA -
RB10-1 Messenger Pre-Amp Board, Includes Relays (NOS)
$17.91 -
SK1400A Eimac Tube Socket for 4CX3000A, with Screen Bypass (Pull)
$1,099.91 -
ECA26028 High Voltage Transformer, 208/230vac 3 Phase, Primary, 6000vac 3amp Secondary, Removed from Henry 3000D
$589.95ECA26028 High Voltage Transformer, 208/230vac 3 Phase, Primary, 6000vac 3amp Secondary, Removed from Henry Electronics 3000D
This transformer was removed from a working Henry 3000D RF Power Generator. In excellent condtion - Like New.
Size: 12" Long x 8" High x 10" wide, Weight: 120 lbs (Must ship by Truck Freight)
Made in USA, Limited Quantity Available, Not Available for ExportMade in the USA -
-
3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
$1,095.003000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
RF Deck removed from Henry Electronics RF Power Generator 3000D. The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.
The deck consists of the following items:
- Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
- Tube socket and chimney for 3CX3000A7 tube (Tube not included) See 3CX3000A7
- Plate choke assembly
- Line Section w/ elements
- See HENRY "2000 WATT SECTION" diagram below:
MFR: Henry Electronics, USA
Limtied Quantity Available Not for Export
Made in the USA
