VINTAGE
Vintage: RF Parts Company has more than 20,000 sq. ft. of VINTAGE Communications Equipment and Electronic Parts. Due to the enormous volume of our inventory, much of it is not listed on our www.rfparts.com website (we have been uploading our inventory as time allows, since 1992. Please send an email to rfp@rfparts.com or call 1-800-RFPARTS (1-800-737-2787) to check availability and pricing.
-
HENRY 3000D Radio Frequency Power Generators from Henry Electronics
$3,990.95HENRY 3000D Radio Frequency Power Generators, rated at 3000 Watts Continuous Output on 13.56 MHz
We have stored several Henry 3000D Generator/Amplifier units in one of our warehouses for more than 15 years. They were removed from service at "Applied Materials". The Henrys as a whole and the parts therein, are in good condition. Each unit is tested and evaluated by our Chief RF Engineer, W6NQ.
- Eimac 3CX3000A7 tube.
- Full Bird Dual Slug Wattmeter setup with forward and reflected power.
- Three Phase 208/240 V input.
- Full inventory of all electronic parts is not complete. Thank you for your patience, as we are still, "Under Construction" with this endeavor.
- Power requirement: 40 Amps
Please send an email to customerservice@rfparts for any questions that you may have.
Weight 600 lbs. (Local Pickup or Truck Freight)
FOB San Marcos, CA
MFR: Henry Radio Electronics, California
Not available for export Limited Warranty
Made in the USA -
HICKOK 539C Calibrated Tube Tester (Pull)
$2,049.95Out of stock
-
SK300A Eimac Tube Socket, Air System for 4CX3500A or 4CX5000A Tubes (Pull)
$1,119.91Removed from working equipment. Has original circuitry attached as well as two large cable leads coming from the base of the circuit.
The socket has one tooth missing from the top ring.
Used * No longer available for export
MFR: Eimac
SKU: SK300A-PWC
NOTE: Picture resents the part you will be receiving.Made in the USA -
SK1400A Eimac Tube Socket for 4CX3000A, with Screen Bypass (Pull)
$1,099.91 -
3000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
$1,095.003000D Henry Electronics Radio Frequency Deck, from a 3000D Amplifier Power Generator
RF Deck removed from Henry Electronics RF Power Generator 3000D. The Eimac 3CX3000A7 tube is not included. The RF Deck is rated at 3000 Watts Continuous Output on 13.56 MHz. Please send an email to rfp@rfparts.com for an explanation of our Terms of Warranty.
The deck consists of the following items:
- Case with Grid current adjuster (PA Load) and Tune adjuster (PA Tune)
- Tube socket and chimney for 3CX3000A7 tube (Tube not included) See 3CX3000A7
- Plate choke assembly
- Line Section w/ elements
- See HENRY "2000 WATT SECTION" diagram below:
MFR: Henry Electronics, USA
Limtied Quantity Available Not for Export
Made in the USA -
SK300A Eimac Tube Socket, Air System for 4CX3500A or 4CX5000A Tubes (Pull)
$999.91 -
CVDG-1000-15N808 Jennings Vacuum Variable Capacitor, 10-1000pf, 15kv (Pull)
$995.00 -
-
23TRX6b Bowmar Synchro Receiver Transmitter Type 55145 115v 60Hz (Pull)
$949.91 -
CV1C-500UIHN/15 Vacuum Variable Capacitor, 12-500pf, 15kv Peak / 9KV, Comet (NOS)
$899.95