Tubes - Transmitting, Audio, Misc.

The 813 beam power tube was very popular with amateur radio operators following WW II. The tube remained a staple of amateur radio until single sideband became a popular operating mode in the late 1950's and early 1960's. Featuring a graphite plate with an ICAS dissipation rating of 125 watts the tube was very economical and a pair could provide legal limit operation (1 kilowatt input) on CW or AM.

New Old Stock * No longer available for export
MFR:  Sylvania
SKU: 813-WEST

• Test results 90% of Specifications

Used * No longer available  for export
MFR:  RCA
SKU: 813-RCA-90-P

The 813 beam power tube was very popular with amateur radio operators following WW II. The tube remained a staple of amateur radio until single sideband became a popular operating mode in the late 1950's and early 1960's. Featuring a graphite plate with an ICAS dissipation rating of 125 watts the tube was very economical and a pair could provide legal limit operation (1 kilowatt input) on CW or AM. Later tubes manufactured by RCA and Amperex featured an improved plate made of zirconium-coated nickel.

Used * No longer available  for export
MFR:  RCA
SKU: 813-RCA-P

The 813 beam power tube was very popular with amateur radio operators following WW II. The tube remained a staple of amateur radio until single sideband became a popular operating mode in the late 1950's and early 1960's. Featuring a graphite plate with an ICAS dissipation rating of 125 watts the tube was very economical and a pair could provide legal limit operation (1 kilowatt input) on CW or AM.

New Old Stock * No longer available for export
MFR:  Amperex
SKU: 813-AMP

The 813 beam power tube was very popular with amateur radio operators following WW II. The tube remained a staple of amateur radio until single sideband became a popular operating mode in the late 1950's and early 1960's. Featuring a graphite plate with an ICAS dissipation rating of 125 watts the tube was very economical and a pair could provide legal limit operation (1 kilowatt input) on CW or AM. Later tubes manufactured by RCA and Amperex featured an improved plate made of zirconium-coated nickel.

New Old Stock * No longer available  for export
MFR:  RCA
SKU: 813-RCA

YU-158 (YU158) tubes are "SELECT" tubes for medical use 8877 tubes.

• Dented Heat Sink

Tested Pullout * No longer available for export
MFR: Eimac
SKU: YU158-DENT-P

30 Day Warranty

Designed to be used in class A, B, C amplifiers. 211 can replace a GL-211 and UV-211. Has a 10v heater, 1250 plate voltage with 100W dissipation. Has a power output of 42.5 watts with 7.5 watts drive at 1250V plate.
Manufactured in China by Shino
SKU: 211

812A Transmitting Tube, Taylor Tubes

Made in China

812A  RF Parts Transmitting Tube Matched Pair (2) 

MFR: China