Tubes - Transmitting, Audio, Misc.
Please choose from the following TUBES Sub-Catagory choices:
572B |
811A |
6146 |
|
4CX350 Series | |||
SOCKETS |
CHIMNEYS |
PLATE CAPS |
|
BOOKS |
BASES |
PARASITIC SUPPRESSOR |
-
123-216 Johnson Ceramic 5 Pin Tube Socket (NOS/NIB)
$71.91 -
SK300A Eimac Air System Tube Socket for 4CX3500A or 4CX5000A Tubes (Pull)
$839.91Removed from working equipment. Has original circuitry attached as well as two large cable leads coming from the base of the circuit.
The socket has one tooth missing from the top ring.
Used * No longer available for export
MFR: Eimac
SKU: SK300A-PWC
NOTE: Picture is the part you will be receiving.Made in the USA -
001839 Eimac Outer Filament Collet for SK-300 Socket (Pull)
$224.91 -
SK-400 Eimac Air-System Socket (Pull)
$87.91The SK-400 Air-System Socket is the recommended socket for use with the 4-400A tetrode, and it may be used as well with 4-250A, 4-125A and other tubes having the same dimensions, like the 3-500zg, or 3cx1200A7. The SK-400 provides efficient connection between the tube and its external circuits, acts as a firm mechanical support for the tube, and controls the flow of cooling air around the tube envelope.
Used * No longer available for export
MFR: Eimac
SKU: SK400-PSee Data Sheet
Photo is for reference only
Made in the USA -
SK-400 Eimac Custom Air-System Socket (Pull)
$70.91The SK-400 Air-System Socket is the recommended socket for use with the 4-400A tetrode, and it may be used as well with 4-250A, 4-125A and other tubes having the same dimensions, like the 3-500zg, or 3cx1200A7. The SK-400 provides efficient connection between the tube and its external circuits, acts as a firm mechanical support for the tube, and controls the flow of cooling air around the tube envelope.
This socket was customized by the previous owner to use a non-standard air source.
Used * No longer available for export
MFR: Eimac
SKU: SK400-P-CUSTOMSee Data Sheet
Photo is for reference only as each socket may have cosmetic differences
Made in the USA -
SK-300 Eimac Socket for 4CX5000 and 4CW10000 (NOS)
$1,499.91 -
SK-300 Eimac Socket for 4CX5000 (Pull)
$1,049.91 -
SK-300A Eimac Replacement Chassis (Pull)
$99.91 -
Eimac Right Angle Mounting Bracket for SK300A/SK300 (Pull)
$14.91 -
Inner Collet Mounting Ring for Eimac SK-300A (Pull)
$19.91